PCM63P Computer IC Chip Collinear ™ Monolithic Audio Digital To Analog Converter

PCM63P Computer IC Chip Colinear ™ 20-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER

FEATURES
●COLINEAR 20-BIT AUDIO DAC

● NEAR-IDEAL LOW LEVEL OPERATION

● GLITCH-FREE OUTPUT

● ULTRA LOW –96dB max THD+N (Without External Adjustment)

● 116dB SNR min (A-Weight Method)

● INDUSTRY STD SERIAL INPUT FORMAT

● FAST (200ns) CURRENT OUTPUT (±2mA; ±2% max)

● CAPABLE OF 16x OVERSAMPLING

● COMPLETE WITH REFERENCE

DESCRIPTION

The PCM63P is a precision 20-bit digital-to-analog converter with ultra-low distortion (–96dB max with a full scale output; PCM63P-K). Incorporated into the PCM63P is a unique Colinear dual-DAC per channel architecture that eliminates unwanted glitches and other nonlinearities around bipolar zero. The PCM63P also features a very low noise (116dB max SNR; A-weighted method) and fast settling current output (200ns typ, 2mA step) which is capable of 16-times oversampling rates.
Applications include very low distortion frequency synthesis and high-end consumer and professional digital audio applications.

THEORY OF OPERATION
DUAL-DAC COLINEAR ARCHITECTURE Digital audio systems have traditionally used laser-trimmed, current-source DACs in order to achieve sufficient accuracy. However even the best of these suffer from potential lowlevel nonlinearity due to errors at the major carry bipolar zero transition. More recently, DACs employing a different architecture which utilizes noise shaping techniques and very high oversampling frequencies, have been introduced (“Bitstream”, “MASH”, or 1-bit DACs). These DACs overcome the low level linearity problem, but only at the expense of signal-to-noise performance, and often to the detriment of channel separation and intermodulation distortion if the succeeding circuitry is not carefully designed.
The PCM63 is a new solution to the problem. It combines all the advantages of a conventional DAC (excellent full scale performance, high signal-to-noise ratio and ease of use) with superior low-level performance. Two DACs are combined in a complementary arrangement to produce an extremely linear output. The two DACs share a common reference and a common R-2R ladder to ensure perfect tracking under all conditions. By interleaving the individual bits of each DAC and employing precise laser trimming of resistors, the highly accurate match required between DACs is achieved.
This new, complementary linear or dual-DAC Colinear approach, which steps away from zero with small steps in both directions, avoids any glitching or “large” linearity errors and provides an absolute current output. The low level performance of the PCM63P is such that real 20-bit resolution can be realized, especially around the critical bipolar zero point.
Table I shows the conversion made by the internal logic of the PCM63P from binary two’s complement (BTC). Also, the resulting internal codes to the upper and lower DACs (see front page block diagram) are listed. Notice that only the LSB portions of either internal DAC are changing around bipolar zero. This accounts for the superlative performance of the PCM63P in this area of operation.
DISCUSSION OF SPECIFICATIONS
DYNAMIC SPECIFICATIONS Total Harmonic Distortion + Noise The key specification for the PCM63P is total harmonic distortion plus noise (THD+N). Digital data words are read into the PCM63P at eight times the standard compact disk audio sampling frequency of 44.1kHz (352.8kHz) so that a sine wave output of 991Hz is realized. For production testing, the output of the DAC goes to an I to V converter, then to a programmable gain amplifier to provide gain at lower signal output test levels, and then through a 40kHz low pass filter before being fed into an analog type distortion analyzer. Figure 1 shows a block diagram of the production THD+N test setup.
For the audio bandwidth, THD+N of the PCM63P is essentially flat for all frequencies. The typical performance curve, “THD+N vs Frequency,” shows four different output signal levels: 0dB, –20dB, –40dB, and –60dB. The test signals are derived from a special compact test disk (the CBS CD-1). It is interesting to note that the –20dB signal falls only about 10dB below the full scale signal instead of the expected 20dB. This is primarily due to the superior low-level signal performance of the dual-DAC Colinear architecture of the PCM63P.
In terms of signal measurement, THD+N is the ratio of DistortionRMS + NoiseRMS / SignalRMS expressed in dB. For the PCM63P, THD+N is 100% tested at all three specified output levels using the test setup shown in Figure 1. It is significant to note that this test setup does not include any output deglitching circuitry. All specifications are achieved without the use of external deglitchers.
Dynamic Range Dynamic range in audio converters is specified as the measure of THD+N at an effective output signal level of –60dB referred to 0dB. Resolution is commonly used as a theoretical measure of dynamic range, but it does not take into account the effects of distortion and noise at low signal levels. The

Deli electronics tehcnology co ltd
www.icmemorychip.com
Email:sales3@deli-ic.com
Skype:hkdeli881
TEL:86-755-82539981

DELI ELECTRONICS TECHNOLOGY CO.,LTD was founded in 2005.

DELI has developed into a comprehensive supply chain of electronic components.The main business line of

the company include Integrated circuit,Thyristor,diodes,transistors,capacitors,relaysconnectors,switches,

led,sensor,inductor.

DELI always adhering to the principle of Our good service,serving the customers with high-quality electronics products. all products original & new only, most of products passed CE, ROHS, SGS, UL, VDE, FCC certificate.

DELI does not have complicated procedures.

DELI is committed to quality service and first-class quality. Quick Quote - Quickly Lock Inventory - Fast Delivery - Provides personalized service as the goal.

Come on! contact and send your BOM list to DELI.

we are looking forward to supply sincerely and long-term service for you.