40ka DC Module PV Surge Protection Device For Solar System
Brand Name:BRITEC
Certification:CE/TUV/CB
Model Number:BRPV3-1000
Minimum Order Quantity:100 piece / pieces
Delivery Time:15-30 days after payment
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Address:
Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
PV DC SPD 20ka-40ka DC Module Surge Protection Device Designed for
Solar System
PV DC SPD 20ka-40ka DC Module Surge Protection Device Description:
• BRPV3 PV Surge Protective Device 40KA DC SPD suitable for the new
energy wind power generation system, its working voltage covers
600V, 1200V and 1500V.
• The BRPV series Surge Protection are designed to protect against
lightning surge voltages in photovoltaic power supply networks.
• It is installed in the main power system at DC circuit, to
protect against the indirect lighting current, direct lighting
current or other instantaneous over voltage.
PV DC SPD 20ka-40ka DC Module Surge Protection Device Product
Details:
| BRPV3-1000 | |
| SPD classification according to EN61643-31 | Type 2 |
| SPD classification according to IEC61643-31 | Class II |
| Max. continuous operating dc voltage Ucpv | 1200V |
| Nominal discharge current (8/20us) In | 20kA |
| Max. discharge current (8/20us) Imax | 40kA |
| Voltage protection level [(DC+/DC-)→PE] Up | ≤4.0kV |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermoplastic UL94-V0 |
| Degree of protection | IP20 |
| Order Code | B18010 |
| Order code(With remote signal) | B18012 |
Dimension:
PV DC SPD 20ka-40ka DC Module Surge Protection Device Features:
a. Module design, convenient installation, with easy electric
maintains operation.
b. These units must be installed in parallel on the DC networks to
be protected
c. Built-in over current and over heat, temperature control open
circuit technology.
d. The BRPV3-1000 is available for the main operating voltages in
photovoltaic: 1200 Vdc.
e. Adopt independent intelligence property right and high
performance sensitivity resistance plates.
f. The use of BRPV3-1000 Surge Protection is recommended at both
ends of the DC power supply line (solar panel side and
inverter/converter side)
g. Small creepage current, fast response time, remnant low voltage.
h. The BRPV series is made with plug-in modules to allow a fast and
easy maintenance in case of failure (disconnection from the DC
network).
i. With remote connection, can realize remote control.
Overvoltage can hit a PV system in several different ways:
• From the grid if lightning strikes on medium or low voltage
conductors
• From the earth if lightning strikes close to the inverter
• From the DC side if lightning strikes the PV modules
• SPDs are thus necessary to protect inverters and other sensitive
equipment.
Working principle of product:
In the solar photovoltaic system, the inductive or capacitive
coupling voltage is caused by the lightning shock and the switching
operation of the upstream power supply system. Therefore, the surge
may damage the photovoltaic modules and inverters, which will cause
serious consequences for the operation of the photovoltaic system.
The photovoltaic lightning arrester is specially developed for this
purpose. The lightning protection module of the DC power supply,
once the high voltage, and endanger the insulation of the protected
equipment, the lightning arrester acts immediately, and the high
voltage impact current is directed to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
equipment. When the overvoltage is gone, the arrester is restored
to its original state quickly, so as to protect the power
equipment.
Our Services:
• 21 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Packaging & Shipping:
Company information:
Wenzhou Britec Electric Co., LTD. a Chinese professional SPD
manufacture company. Our company was established in 2003, is
China's professional produce low voltage surge arrester of
enterprises. Welcome the friends from anywhere in the world, as
long as you have about surge protection device demand, please
contact us!
Certification:
FAQ:
Q: Are you an agent or a factory?
A: We are a factory.
Q: What is the port of exportation for your factory?
A: Ningbo/Shanghai,China.
Q: What’s your main market?
A: Western Europe, Eastern Europe, northern Europe, southern
Europe, Central Europe, East Asia, South Amercia, the Middle East
and so on.
Q: What’s the MOQ?
A: Normally 100pcs.
Q: Why choose us?
A: We have rich experience in produce and professional quality
control system.
Q: Can you let me how to control the quality?
A: We have our QC team and quality control system, before
packaging, we will inspect the goods carefully. We will try our
best to make you satisfactory.
Q: What’s the payment terms?
A: 30% deposit, balance before shippment.
Q: What’s the mass production lead time?
A: Usually 20 days after receiving the customer’s deposit.
Q: What the certificates do you have?
A: TUV, CE, CB etc.
40ka DC Module PV Surge Protection Device For Solar System
Inquiry Cart
0