30Mbps RJ45 Gigabit Signal Ethernet Surge Protection Devices CAT5 CAT6
Brand Name:BRITEC
Model Number:BRRJ45L-4L
Minimum Order Quantity:200 Piece/Pieces
Delivery Time:Shipped in 15-30 days after payment
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Address:
Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
RJ45 Gigabit Signal Surge Protector Device CAT5/CAT6 LAN Lightning Arrestor Network Suppressor
About RJ45 Gigabit Signal Surge Protector Device:
• Ethernet Surge Protector for Gigabit LAN Ethernet Network.
• Ethernet Surge Protector - RJ-45 LAN Network Thunder Lightning
Surge Suppressor/Arrester Protection Ethernet Network Card RJ45
Surge Protector Thunder Lightning Arrester Protection Device
Protects your Ethernet device from the damage of lightning &
surge.
• Lightning Suppressor RJ45 Cable Protection CAT6/CAT5
• Easy to install. Install between Ethernet and the protected
device first, "IN" end is for input and "OUT" end is for output to
the protected device, then set ground wire well and straight.
• Aluminum Case, Line-Line Line-Ground Protection, 5KA 8/20μs
• Connectors: RJ-45.
• Thunder Arrestor Protects Computer Networking Equipment Devices
like Router, Modem, Camera, Switch etc.
• Material: shielded aluminum alloy.
• Mounting Flanges provide option for screw mount to the Wall,
Electric Panel or Network Rack Cabinet
RJ45 Gigabit Signal Surge Protector Device Product Details:
| BRRJ45L-4L | |
| Test standards | IEC61643-21 |
| Nominal voltage Un | 5V |
| Max.continuous operating d.c.voltage Uc | 6V |
| Max.continuous operating a.c.voltage Uc | 4V |
| Nominal current IL | 0.5A |
| C2 Nominal discharge current (8/20us) per line In | 5kA |
| Voltage protection level [line-line] Up | ≤30V |
| Voltage protection level [line-PG] Up | ≤500V |
| Response time [line-line] tA | ≤1ns |
| Response time [line-PG] tA | ≤100ns |
| Operating temperature range Tu | -40℃…+80℃ |
| Connection (input/output) | RJ45 socket |
| Bandwidth | 30 Mbps |
| Insertion Loss | ≤0.3dB |
| Enclosure material | aluminium alloy |
| Degree of protection | IP20 |
Dimension:
RJ45 Gigabit Signal Surge Protector Device Product description:
• Ethernet Surge Protector is a surge protection device (SPD) that
is inserted inline on an RJ45 CAT6/CAT5/CAT5e cable to prevent
damage of electronic networking equipment.
• Dimensions: 84mm x 25mm x 25mm.
• Powerful surges that the device protects against include direct
lightning strikes, voltage spikes, or PoE overvoltages.
• Supports Ethernet card, Repeater, HUB, Switchboard, Router or
other Ethernet devices.
• It ensures the safety of a wide array of valuable components such
as switch, router, modem, bridge, repeater, or any part of internet
service network.
• Please install surge protector within 1 meter from device
protected.
• Mounting flange on the both sides of lightning suppressor allows
easy mounting to a wall, network panel, cabinet, or rack attaching
by screws (not included).
RJ45 Gigabit Signal Surge Protector Device Installation:
• The Ethernet lightning arrestor must be properly grounded to
work.
• The ethernet ground wire (11 Inch - 12 AWG) on the surge
protector needs to be connected to ground through the shortest
path. Excess electricity will follow the path of least resistance.
• In most cases, a ground busbar on an electrical panel or network
rack cabinet is already grounded and is typically the easiest way
to ground the wire.
• Other options to ground RJ45 surge protector are grounding block
on the breaker panel, grounding rod or terminal of the closest
outlet by connecting the ground wire to circular grounding hole on
the grounded outlet center screw.
• The lightning arrestor can be used with unshielded twisted pair
(UTP) or shielded (STP) cables. The arrester is housed in a cast
aluminum enclosure. The metal housing allows shielded current to be
passed through the metal case of the network surge protector.
Company information:
Wenzhou Britec Electric Co., Ltd. is a manufacturer and exporter
specialized in SPDs. Such as ac surge protector, dc surge
protection, LED lighting surge arrester, data surge protective
device and so on. Our company is located in Yueqing, Zhejiang,
China. Convenient transportation, excellent quality and prices and
good service attract customers from each place of the world. Our
company culture is "sincere and trustworthy, punctuality, high -
quality" Welcome every clients!
Certificate:
Payment & Shipping:
FAQ:
Q1: Are you a trade company or a manufacturer?
A: We are the manufacturer and we are specialized in low voltage
surge protection field.
Q2: What is your delivery date?
A: Sample Order: 7-15 days after receipt of the full payment; Mass
Order: 15-20days after receipt of the full payment; OEM Order:
15-30days after receipt of the deposit.
Q3: What is your payment terms?
A: Paypel, TT, L/C ect.
Q4: Can you send samples?
A: Yes, every time you need, please contact us directly.
30Mbps RJ45 Gigabit Signal Ethernet Surge Protection Devices CAT5 CAT6
Inquiry Cart
0