15kA Power Lightning Protection Type 2 Surge Protector Surge Arrester
Brand Name:BRITEC
Model Number:BR-15DP 275 2P
Minimum Order Quantity:100 Piece/Pieces
Delivery Time:Shipped in 15 days after payment
Payment Terms:L/C, D/A, T/T, Western Union
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Address:
Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
15kA Secondary Power Surge Protector Surge Arrester Lightning Protector
15kA Secondary Power Surge Protector Feature:
• Devices have indicators to advise end of life of the device
• BR-15DP 2P is the Type 2/Class II devices protecting against
induced voltage surges (8/20 μs).
• The device meets the requirements of the IEC 61634-1 and EN
61643-11 standards
15kA Secondary Power Surge Protector Technology characteristic:
| Specification | BR-15DP 275 2P |
| Item name | Surge Arrester |
| SPD dassification according to EN61643-11 | Type 2 |
| SPD dassification according to IEC61643-11 | Class II |
| Max continuous 0perating a.c. voltage Uc | 275V |
| Max. discharge current (8/20µs) Imax | 15kA |
| Norminal discharge current (8/20µs) In | 5kA |
| Voltage protection level Up | ≤1.3kV |
| Response time tA | ≤25ns |
| For mounting on | 35mm Din rail |
| Degree of protection | IP20 |
| Operating temperature range Tu | -40℃—80℃ |
| Cross-section area (Min.) | 2.5mm² |
| Cross-section area (Max.) | 16mm² |
| Enclosure material | Thermal plastic UL94-V0 |
Dimension:
15kA Secondary Power Surge Protector Installation:
• Installation as defined in the standard is simple enough, the
device is connected with cables to and from the unit no longer than
a meter in total, and a short path to earth will ensure the
effective discharge of the surge to earth.
• If a Type 2 SPD is installed and cable lengths are less than 10m,
then there is no longer a requirement to fit Type 3 surge protected
extension leads. If greater than 10m then type 3 surge protection
should be fitted.
• For the most part a simple two pole device for single phase TT or
TNS will be enough. In TNCS systems a single pole unit may be
sufficient as only the live conductor comes to the property that
can bring a threat from outside influences affecting that supply.
Types of Surge Protection Devices (SPD):
Type 1 SPD:
The Type 1 SPD is recommended in the specific case of
service-sector and industrial buildings, protected by a lightning
protection system or a meshed cage. It protects electrical
installations against direct lightning strokes. It can discharge
the back-current from lightning spreading from the earth conductor
to the network conductors. Type 1 SPD is characterized by a 10/350
µs current wave.
Type 2 SPD:
The Type 2 SPD is the main protection system for all low voltage
electrical installations. Installed in each electrical switchboard,
it prevents the spread of overvoltage in the electrical
installations and protects the loads. Type 2 SPD is characterized
by an 8/20 µs current wave.
Type 3 SPD:
These SPDs have a low discharge capacity. They must therefore
mandatorily be installed as a supplement to Type 2 SPD and in the
vicinity of sensitive loads. Type 3 SPD is characterized by a
combination of voltage waves (1.2/50 μs) and current waves (8/20
μs).
Our service:
• Pre-sale Services:
1. Provide free consulting, to resolve the confusion from customers.
2. Mining and carefully study customer's needs, provide detail and suitable design solutions.
• In-sale Services:
1. Try best to meet the reasonable demands by customers.
2. Cooperate friendly with client and satisfy our clients with best quality SPD.
• After-sale Services:
1. Provide 2-year guarantee for products.
2. A complete after-sale service system to help customers resolve the problems during the using time.
Company profile:
Wenzhou Britec Electric Co., Ltd. is a professional engaged in SPD products research and development, design, production and service in the integration of modern professional surge protection production enterprises, production base is located in Yueqing, Zhejiang, China. With OEM/ODM high standard production workshop, has a new standard of high-end production equipment, perfect supporting factory layout is reasonable, the spacious production workshop, according to the international surge protector factory standard production design, is the domestic strong r & d manufacturers.
Shipping:
Our certifications:
FAQ:
Q1: What is MOQ?
A: 100pcs.
Q2: How to ship?
A: By sea, by air or express.
Q3: How to place a order?
A: Place order with saler; Make payment for deposit; Goods are finished, inform buyer to make payment for balance; Delivery.
Q4: What's your payment terms?
A: For samples, T/T 100% as deposit. For bulk orders, T/T 30% as deposit and T/T 70% before delivery.
15kA Power Lightning Protection Type 2 Surge Protector Surge Arrester
Inquiry Cart
0