MB10S 0.5A 1000V Silicon Rectifier Diode Single Phase Bridge Rectifier
Brand Name:ANYO
Model Number:MB10S
Minimum Order Quantity:100000pcs
Delivery Time:8-10 work days
Payment Terms:L/C, T/T
Place of Origin:CHINA
Contact Now
Add to Cart
Site Member
Location:
Ningbo Zhejiang China
Address:
ROOM 1305-2, AUX BUILDING, NO. 757 RILI MIDDLE RD, YINZHOU NINGBO, 315199, CHINA
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
MB10S 0.5A 1000V single-phase glass passivated bridge rectifiers
Description:
A diode bridge rectifier is a device for converting AC, or
alternating current electricity into DC, or direct current. AC
electricity goes from positive to negative constantly, whereas DC
always flows in the same direction. AC electricity is more
efficient to transmit and easier to convert into different
voltages, so power is transmitted from the station to your house as
AC. However, most appliances need DC current to run. A diode bridge
rectifier is the most common type of power supply used to provide
this current.
Single-phase bridge rectifier is the most frequently-used circuit for electronic dc power
supplies. It requires four diodes but the transformer used is not
center-tapped and has a maximum voltage of VSM. The full-wave
bridge-rectifier is available in three distinct physics forms. The
main advantage of this bridge circuit is that it does not require a
special centre tapped transformer, thereby reducing its size and
cost. The single secondary winding is connected to one side of the
diode bridge network and the load to the other side.
Features:
• This series is UL listed under the Recognized Component Index,
file number E142814
• Ideal for surface mount application
• The plastic material used carries Underwriters Laboratory
flammability recognition 94V-0
• Surge overload ratings to 30 amperes
• High temperature soldering guaranteed 265 C/10 seconds at 5 lbs
(2.3kg) tension
Application:
• Can be used to prevent reverse polarity problem
• Half Wave and Full Wave rectifiers
• Used as a protection device
• Current flow regulators
Maximum Ratings & Thermal Characteristics:
Rating at 25℃ ambient temperature unless otherwise specified, Resistive or
Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
| Parameter | Symbol | MB10S | Unit |
| Max.repetitive peak reverse voltage | VRRM | 1000 | V |
| Max. RMS bridge input voltage | VRMS | 700 | V |
| Max. DC blocking voltage | VDC | 1000 | V |
| Max. average forward rectified output current at TA=40℃ | IF(AV) | 0.5 | A |
| Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) | IFSM | 30.0 | A |
| Rating for fusing (t<8.3ms) | I2 t | 10 | A2 sec |
| Typical thermal resistance per element | ReJA | 110 | ℃/W |
| Typical junction capacitance per element | Cj | 25 | pF |
| Operating junction and storage temperature range | Tj | -55 to +150 | ℃ |
Electrical Characteristics:
Rating at 25℃ ambient temperature unless otherwise specified. Resistive or
Inductive load, 60Hz.
For Capacitive load derate by 20 %.
| Parameter | Symbol | MB10S | Unit |
| Max. instantaneous forward voltage drop per leg at 0.5A | VF | 1.1 | V |
Max. DC reverse current at rated TA=25℃ | IR | 10.0 | μA |
Dimension:
MB10S 0.5A 1000V Silicon Rectifier Diode Single Phase Bridge Rectifier
Inquiry Cart
0