Radial Leaded Multilayer Ceramic Capacitor , CT4 Monolithic Ceramic Capacitors

Brand Name:ANYO
Model Number:CT4
Minimum Order Quantity:2000pcs
Delivery Time:8-10 work days
Payment Terms:L/C, T/T
Place of Origin:China
Contact Now

Add to Cart

Site Member
Location: Ningbo Zhejiang China
Address: ROOM 1305-2, AUX BUILDING, NO. 757 RILI MIDDLE RD, YINZHOU NINGBO, 315199, CHINA
Supplier`s last login times: within 2 hours
Product Details Company Profile
Product Details

Radial leaded multilayer monolithic ceramic capacitor CT4 NPO X7R


Description:


A ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the producion of capacitors, as it was a known insulator. Many geometries were used in ceramic capacitors, of which some, like ceramic tubular capacitors and barrier layer capacitors are obsolete today due to their size, parasitic effects or electrical characteristics. The types of ceramic capacitors most often used in modern electronics are the multi-layer ceramic capacitor, otherwise named ceramic multi-layer chip capacitor (MLCC) and the ceramic disc capacitor. MLCCs are the most produced capacitors with a quantity of approximately 1000 billion devices per year. They are made in SMD (surface-mounted) technology and are widely used due to their small size. Ceramic capacitors are usually made with very small capacitance values, typically between 1nF and 1µF, although values up to 100µF are possible. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.


Features:

Miniature size, wide capacitance, tape and reel packaging available for auto-placement
Coating by epoxy resin, creates the excellent humidity resistance and preventsbody from damaging during soldering and washing.


T.C.NPO/COGX7RY5VZ5U
Dielectric typeStable class Ⅰ dielectricStable class Ⅱ dielectric
Electrical propertiesWith negligible dependence of electrical properties on temperature, voltage, frequency and time.With predictable change of properties with temperature, voltage, frequency and time, this dielectric is ferroelectric and offers higher capacitance ranges than class Ⅰ.With high twist dielectric constant and greater variation of properties with temperature and test conditions, very high capacitance per unit volume.
ApplicationUse in circuits requiring stable performanceUse as blocking, coupling, by-passing discriminating element.Suited for by-passing and coupling application such as store power and memory circuit.
Capacitance range1pf---10nF100pf---5uF1nF---14.7uF
Operating temperature

0±30ppm/℃

-55℃~+125℃

±15%

-55℃~+125℃

±30%~80%

-25℃~+85℃

±22%~56%

-10℃~+85℃


Electrical Properties Standard

ItemTest standard
NPOX7RZ5U,Y5V
CapacitanceWithin the toleranceWithin the toleranceWithin the tolerance
Dissipation factor≤0.15%≤3.5%

≤5.0%(below 220nF)

≤7.0%(220nF~470nF)

Insulation resistance

C≤10nF

IR>10000MΩ;

C>10nF

R.C.>500ΩF

C≤25nF IR>4000MΩ;

C>25nF R.C.>100ΩF

Voltage test

Voltage test: 2.5 rated voltage, the charging current may not exceed 50mA.

Duration of test: 5 seconds

Test condition
Frequency1M Hz(C>1000pF, 1KHz)1M Hz
Test voltage1.0VDC0.5VDC
Test Voltage pf IRThe measuring voltage isequal to the rated voltage. The charging current may not exceed 50mA.
Test environment conditions

Temperature: 23±2℃,

Relatively humidity: Below 75%

Notice: If test were processed under No-standard test environment conditions, test result would be error. Please testing capacitors under standard test environment conditions for at least 20mins. then start to test.


Quality item & Reliability inspection

ItemTest specificationsTest methods
SolderabilityTermination area shall be at least 75% covered with a new solder coatingThe lead wire of a capacitor shall be dipped into a 25% methanol solution of rosin and then into molten solder of 235℃±5℃ for 2±0.5 seconds, in both cases the depth of dipping is up to about 2.5 to 3.0mm from the root of lead
Resistance to soldering heatThere shall be no evidence of damage or flash over during the test and sign in focusT.CC/C≤The lead wire should be immersed into the melted solder of 260℃±5℃,up to about 2.5 to 3.0mm from the main body for 5±0.5 seconds and the specified items shall be measured after leaving for 24±2 hours.
NPO0.5% or 0.5pF
B±10%
D.F. IR value are equal to original datasY(F)/E±20%
Life testAppearanceThere shall be no evidence of damage or flash over during the test and sign in focusConditionNPOX7RY5VZ5U
Temperature125℃85℃
Value variable

NPO:≤3%;

X7R:≤20%;

Y5V:≤30%

TimeT=1000h
VoltageV=1.5Vr
D.F.≤2 times of original dataRecovery time24±1h
IRR.C.>25ΩF


China Radial Leaded Multilayer Ceramic Capacitor , CT4 Monolithic Ceramic Capacitors supplier

Radial Leaded Multilayer Ceramic Capacitor , CT4 Monolithic Ceramic Capacitors

Inquiry Cart 0