1000 Liter RO+EDI Module Water Treatment Equipment With SEKO Pump / CIP System
Brand Name:CHUNKE
Certification:CE,ISO
Model Number:CK-EDI
Minimum Order Quantity:1 unit
Delivery Time:7-15days
Payment Terms:L/C, T/T, Western Union,paypal
Contact Now
Add to Cart
Active Member
Location:
Guangzhou Guangdong China
Address:
8 Suyuanzhuang, Junhe Street, Baiyun District, Guangzhou, China
Supplier`s last login times:
within 13 hours
Product Details
Company Profile
Product Details
1000liter RO+EDI Module Water Treatment Equipment With SEKO
Pump/CIP System
1000L/H Two-stage RO Configuration list
| Equipment name | 1000L/H two-stage RO | ||||
| No. | Accessories name | Specification | Quantity | Unit | Brand |
| 1 | Original water tank 304 stainless steel / PE anti-corrosion | (Customer supply) | 1 | SET | |
| 2 | Original water pump | 1 | SET | CNP | |
| 3 | Mechanical filter | 1 | SET | CHUNKE | |
| 4 | Activated carbon filter | 1 | SET | CHUNKE | |
| 5 | Water softener | 1 | SET | CHUNKE | |
| 6 | PH adjustment dosing system | 1 | SET | SEKO | |
| 7 | 5μm security filter | 1 | SET | CHUNKE | |
| 8 | High pressure pump | 1 | SET | CNP | |
| 9 | Two-stage reverse osmosis pure water device Water production: 1.0m3/h, salt rejection: 97～99% | 1 | SET | CHUNKE | |
| 10 | RO water tank PE anti-corrosion | 1 | SET | CHUNKE | |
| 11 | EDI feed water pump | 1 | SET | CNP | |
| 12 | 0.22μm precision filter | 1 | SET | CHUNKE | |
| 13 | EDI deionization device, water production: 1.0m3/h, water quality: conductivity ≤0.2us/cm | 1 | SET | CHUNKE | |
| 14 | EDI ultra-pure water tank | PE anti-corrosion | 1 | SET | CHUNKE |
| 15 | Connecting pipe fittings (food grade UPVC pipe valve parts are used from the original water tank outlet to the terminal fine filter outlet, and 304 stainless steel outer polished pipe valve parts are used for the reverse osmosis high pressure part.) | 1 | SET | CHINA | |
| 16 | Electronic control system | 1 | SET | CHUNKE | |
| 17 | Pressure gauge | 1 | SET | CHINA | |
| 18 | Panel flowmeter (0-10GPM) | 1 | SET | CHINA | |
The EDI module is mainly composed of the following parts:
1) The fresh water chamber fills the ion exchange resin between the anion and cation exchange membranes to form a fresh water chamber; 2) the concentrated water chamber adds a resin between the anion exchange membranes of the adjacent fresh water unit to form a concentrated water chamber;
3) The polar water chamber is filled with resin between the electrode plate and the adjacent ion exchange membrane to form an extreme water chamber. There are positive and negative two polar water chambers in one membrane block;
4) Insulation board and pressing plate
5) Power and water connection The Kanpu EDI module has revolutionized the internal structure of the membrane based on the traditional EDI technology, which greatly shortens the water supply conditions of EDI, greatly simplifies the operation and greatly reduces the operating cost.
EDI module water requirements:
Each of the following indicators is the minimum necessary condition
to ensure the normal operation of EDI. In order to make the system
run better, the system should be designed to increase the water
supply requirements.
1, Water supply: reverse osmosis water production
2, TEA (total exchangeable anion, calculated as CaCO): <35 ppm.
TEA includes all anions and substances that are removed by EDI in
an anionic form. Since CO2, SiO2 and HBO3 contained in water are
HCO2/CO2, HSiO/SiOg2- and B(OH).
The form is cleared by EDI, and when the TEA is calculated
empirically, the charges are -1.7, -1.5, and -1.0, respectively.
Some of the HCO3 in the feed water is also removed in the form of
CO2-, and the charge is also calculated in -1.7 when calculating
TEA. The TEA calculation formula is as follows:
TEA=50[Cc1/35.5 2Cs0*/96 1.7Cco/44 1.7Cco-/61 1.5Csi0/60
...J where all substance concentrations are in mg/L.
3, pH: 6.0-9.0 When the total hardness is less than 0.1ppm, the
optimal working pH range of EDI is 8.0~9.0.
The pH value is a reference indicator for water supply, and it is
one of the indicators that indirectly reflects the CO content of
the feed water.
4, temperature: 5-35
5, Inlet pressure: <0.4MPa (60psi).
The inlet pressure of the concentrated/polar water is generally
lower than the outlet pressure of the product water by 0.03-0.05
MPa.
6, Hardness (calculated as CaCO): <10.0 ppm.
Note: The EDI process requires a defined inlet hardness to avoid
fouling. The water hardness is less than 10.0
At the ppm, the CanpureTM Super EDI system has a water utilization
of 90%. Excessive pursuit of higher water utilization is of little
significance because the 100% concentrated water and polar water of
the EDI system can be reused before returning to reverse osmosis.
7, Organic matter (TOC): <0.5 ppm.
8, Oxidizer: Cl2<0.05ppm, O<0.02ppm.
9, Valence metal: Fe<0.01ppm, Mn<0.01ppm.
Pre-treated stainless steel 304 tank
RO Host, UV, EDI detail Picture
Internal Structure of PLC Electric Control Box
1000 Liter RO+EDI Module Water Treatment Equipment With SEKO Pump / CIP System
Inquiry Cart
0