

Add to Cart
Stainless Steel Filter Housing Water Storage Tank Mixing Tank Vessel
Stainless Steel Filter housing Working principle:
This carbon filter consists mainly of carbon layer and supporting
layers. Activated carbon has developed porosity, surface area, has
the very high adsorption ability. It is by active carbon this
characteristic, it is in the deep treatment who is widely used,
such as drinking water, sewage hind paragraph (water) deep
processing, etc.
Use active carbon adsorption after period of time, a large amount
of adsorption qualitative, gradually becoming saturated, lose
working ability, serious when will penetrate filter layer, and
therefore should be timely regenerate active or replacement.
Supporting layer's main function is to prevent activated carbon
from equipment in water erosion, when using rinse water plays a
certain role uniform cloth.
The main technique parameters:
Filtration speed: 8-12m/h water turbidity: < 15mg/L
Effluent turbidity: 5mg/L working temperature: under normal
temperature
Working pressure: < 0.4 Mpa filter material layer height:
1000-1200mm
Reverse-wash compressed air quantity: 18-25L/m2. S compressed air
pressure: 0.1-0.2 Mpa
Reverse-wash strength: 15L/m2. S (single) 12L/m2. S (double)
backwash time: 5-10 minutes
Tability.
Material | stainless steel |
Working pressure | 0.5-0.6MPa |
Housing material | SUS304/316L |
Filter media | mirror polishing |
Bag | 3 |
Inlet/outlet | thread or flange or TC connection |
Used | water treatment |
Filter technology parameters
Filter filtration rate: 8 ~ 300m3 / h |
Backwash time: 8 to 10 |
Working pressure: ≤ 0.6Mpa |
Flushing filter head loss: 0.8 |
Water outlet: 2-5mg/L |
Water inlet: <10mg/L |
Water outlet: <2mg/L |
Design temperature: 5 ~ 4000C |
Single sand filter Height: 700mm (height for circulating water sand filter 500mm) |