Lcd Children Bath 59s Rubber Duck Pool Thermometer
Brand Name:WENMEICE
Certification:CE
Model Number:LDTH-001
Minimum Order Quantity:500pcs
Delivery Time:5~10 work days
Payment Terms:T/T, Western Union,
Contact Now
Add to Cart
Active Member
Address:
Office Address:12th South of Chang'an Road, Yanta 710061, Xi'an, Shaanxi, China Factory Address:#4 YaoJiaCun Industrial Area,YuHua Subdistrict Office ,YanTa District,Xi'an City,Shaanxi,China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
colorful funny animals little duck floating thermometers children bath toys
Specifications:
● Brand: WENMEICE
● Measuring range: 0~60℃
● Precision: ±1℃; Resolution: 0.1℃
● Largest duration of timekeeping: 59min 59sec
● High temperature reminder triggered: higher than 39℃ (adjustable
between 37℃~46℃, 39℃ for default value)
● Low temperature reminder triggered: lower than 35℃
● Batteries: twoLR44 (orAG13)button cells, power lasting for half a
year
● Product material: plastic and electronic components
Functions:
children bath toys
- Measure the water temperature in the bathtub and the light alarm is triggered when the temperature is over-heated or sub-cooled
- ---The red backlight twinkles and the reminder beeps when the water temperature is over-heated;
- (The high temperature reminder can be self-modified)
- ---The yellow backlight twinkles and the reminder beeps when the water temperature is sub-cooled;
- ---The green backlight lightens and the time and current water temperature are displayed when the water temperature is suitable.
- 12/24time format adjustable easily.
- ℃/℉temperature unit adjustable easily.
- Countdown and timekeeping.
- Automatically restore to default setting when the power cuts up or the battery is replaced.
- Wholly-water-proof for the product.
- Available for the toy for your baby, or the clock or the thermometer.
Buttons:
children bath toys
● MODE (SET): power switch, mode, setting and confirmation.
● +/MIN (℃/℉): add value, or single click to switch the temperature
unit easily and cooperate with MODE to set up the time, temperature
and countdown “min”.
● –/SEC(12/24): decrease the value, or single click to switch 12/24
time format or cooperate with MODE to set up the time, temperature
and countdown “sec”.
Setting Steps:
1. Power on/off
Hold MODE button for5s to shut down and hold MODE button for 2s to
power on. (Power the product off and all functions are deactivated
and the clock requires re-setting after power it on)
2. Clock setting
Hold“MODE”button for3s and enter the setting mode, the "hour"
starts to blink. Hold “+”, “–-”to adjust the value and press “SET”
to confirm, and you can set up the minutes which start to blink.
Press“+”, “–”to adjust the value and press “SET” to confirm and the
setting is done. Then, it goes to the setting mode of high
temperature reminder.
3. Set up the high temperature reminder
Following the above setting, it enters the high temperature
reminder setting, and the warning “temperature” blinks. Press “+”,
“–” to adjust the value (adjustable between37℃~46℃, and the default
is 39℃). Press “SET” to confirm and it returns to the interface of
the clock and temperature.
4. Set up the countdown --children bath toys
In the clock mode, press“MODE”once and enter the countdown mode.
The timekeeping mode displays the value of last time (The default
is “00M00S ”) and the product stops its timekeeping in the
timekeeping mode when moved from the water.
Press“MIN”button“SEC”and it automatically switches to the countdown
setting mode. At this time, press“+”and“-”together and the
timekeeper returns to zero: “00M00S” status. Press“MIN”button to
adjust the mi-nutes of the timekeeper and press “SEC” button to
adjust the seconds. (The countdown needs to be reset every time or
else the countdown function cannot be triggered)
After the countdown setting is done, press MODE to start or pause
the countdown, or put the product into the water to start the
countdown that does not stop whether the product is put in or
removed from the water. (Within the range of suitable water
temperature: 60s sound reminder is triggered when the countdown
reaches to the set value.)
5. Set up the timekeeper
In the clock mode, put the thermometer directly into the water and
the timekeeper is initiated without any setting. Or else when the
timekeeper is at zero status in the countdown mode, put the product
into the water or press MODE and it automatically switches to the
timekeeper mode and starts to work. When the product is removed
from water, the timekeeper stops. Put the product within10s and the
timekeeper continues to work and it automatically returns to the
clock mode after10s if not put into water. (Press“+” and “–-”at the
same time and the timekeeper returns to zero)
6. Switch℃/℉unit--digital waterproof children bath toys
In the clock mode, press "+"/MIN button to switch between℃/℉.
7. Switch12/24time format
In the clock mode, press "-"/SEC button to switch 12/24time format.
Replace Batteries for children bath toys :
1. When the backlight turns shimmer and dim, the power is not
sufficient and the batteries need to be replaced.
2. Wipe up the thermometer and do not leave any water on the
surface.
3. Loosen the screws on the battery bunker, put a coin inside the
groove of the battery lid, rotate anticlockwise and the battery lid
pops u. Take out the two button cells (The nethermost one requires
smaller objects to take out the battery like a toothpick).
Distinguish the positive and negative of the battery, put the
negative downward and put two new battery cells likeLR44 (orAG13).
(Notice: There's a round water-proof ring inside the groove of the
battery bunker. It must be put back to the original position
appropriately or it may cause water intruding)
4. Align the battery lid to the screw hold and place it to the
middle of the MODE button. Put a coin inside the middle of the
groove of the batter lid, press it down slightly and rotate
clockwise. Tighten the screw then to prevent children from opening
the battery bunker and swallowing the batteries by mistake.
5. When the batteries are replaced and done. The product comes to
the power-on status by default. If there's mis-take of no display
or disjointed display of the thermometer, perhaps the electrode
piece is deformed and it causes bad contact when taking out the old
batteries. Adjust the position of the electrode piece with a
screwer and make it contact with the side of the second battery or
check if the battery has power.
Notice for children bath toys:
● The green light blinks and the reminder is triggered when the
water temperature is below 35℃.
● The red light blinks and the reminder is triggered when the water
temperature is higher than the set value (37-46℃ for the setting
range, 39℃ for the default value and the product restores to the
default setting if powered off).
● The light and sound reminder is triggered as long as the water
temperature goes beyond the set range of value. The reminder runs
for 30s and it is triggered again every 3 min.
● Do not dismantle the replaced old batteries or litter
arbitrarily. Please recycle the batteries according to the
regula-tions of the government and put them away from the children
to prevent swallowing by mistake.
● digital waterproof baby bath thermometers Water-proof level:
IP67. Put the product back to the water for normal use when the
batteries are installed correctly based on the Instructions.
● All settings wait for 10s for adjustment if not operated and they
automatically go to the clock mode after 10s.
● When the timekeeper goes to 59min 59 s and it automatically
returns to“00M00S" to restart the timekeeping.
● Please clean the 2 metal sensing contactors on the bottom with
small amount of shower gel every time after use. Wipe up the
product with a cloth to prevent failure of sensing and interruption
caused by stains.
● The product children bath toys can only be used under the
guardianship by adult.
Lcd Children Bath 59s Rubber Duck Pool Thermometer
Inquiry Cart
0