

Add to Cart
4K Long Range Surveillance Camera 2D / 3D Noise Reduction Supported
Features
> 1/1.8” Sony Exmor CMOS Sensor.
> Powerful 50x optical zoom (6~300mm).
> Max. 4K/8Mp(3840x2160) Resolution
> Support Electronic Defog and Optical Defog
> Support video output from the network port.
> Support various OSD information overlay.
> Accurate focus, high speed, great image effects, precise color reproduction, excellent night vision with low light effects.
Specification
Model | SG-SCZ8050H | |
Sensor | Image Sensor | 1/1.8" Sony Exmor CMOS |
Effective Pixels | Approx. 841 Megapixel | |
Max. Resolution | 3840(H) x 2160(V) | |
Lens | Focal Length | 6mm~300mm, 50x Optical Zoom |
Aperture | F1.4~F4.5 | |
Close Focus Distance | 1m~5m (Wide~Tale) | |
Angle of View | 59°~1.8° | |
Video Network | Compression | H.265/H.264/H.264H/MJPEG |
Storage Capabilities | TF card, up to 128G | |
Network Protocol | Onvif, GB28181, HTTP, RTSP, RTP, TCP, UDP | |
Resolution | 50Hz: 25fps@4K/8Mp(3840×2160) 60Hz: 30fps@4K/8Mp(3840×2160) | |
S/N Ratio | ≥55dB (AGC Off, Weight ON) | |
Minimum Illumination | Color: 0.01Lux/F1.4 | |
Exposure Compensation | ON/OFF | |
Strong Light Suppression | ON/OFF | |
Electronic Defog | ON/OFF | |
Optical Defog | Night Mode, 900nm~1100nm channel is Optical Defog | |
Zoom Speed | Approx 7s(Optical Wide-Tele) | |
White Balance | Auto/Manual/ATW/Indoor/Outdoor/ Outdoor Auto/ Sodium lamp Auto / Sodium lamp | |
Electronic Shutter Speed | Auto Shutter (1/3s~1/30000s) Manual Shutter (1/3s~1/30000s) | |
Exposure | Auto/Manual | |
2D Noise Reduction | Support | |
3D Noise Reduction | Support | |
Flip | Support | |
External Control | RS232 | |
Communication Interface | Compatible with the SONY VISCA Protocol | |
Focus Mode | Auto/Manual/Semi-automatic | |
Defog | Support | |
Operating Conditions | (-30°C~+60°C/20% to 80%RH) | |
Storage Conditions | (-40°C~+70°C/20% to 95%RH) | |
Power Supply | DC 12V±15% (Recommend: 12V) | |
Power Consumption | Static power: 5W, Sports power: 6W | |
Dimensions(L*W*H) | Approx. 175mm*72mm*77mm | |
Weight | Approx. 900g |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoeletronics devices on the market.