

Add to Cart
Sewer Pipe Inspection Sonar System Underwater Inspection Tvs-6000
TVS-6000 Sonar Pipeline Inspection System detects and pinpoints
targets underwater by means of the principle of wave reflection.
It, therefore, can perform pipeline inspection filled with liquid
to determine the information of crack and debris in the pipe; and
it is the most advanced device for pipeline inspection and
assessment.
Features:
Complete 360 degree continuous simultaneous scan within 1s
Friendly software interface to operate readily
Data and images saved in the hard disc
Built-in roll and pitch angle sensors
Built-in cable counter interface
Inspect pipe profile automatically
Sonar Probe Technical Parameter
Acoustic Parameter | Acoustical frequency | 2MHz |
Wave width | 1.1°(cone wave beam) | |
Lateral resolution | 0.5mm (Pipe radius 125mm) | |
Max. inspection radius | 12m | |
Transmit pulse width | 4~20us | |
Receiving wave width | 500KHz |
Manual Cable Drum:
Counter: high precision coder( ±0.1m), cable length calculation.
Layering: manual layering
Waterproof: IP63
SonarProf Pipe Sonar Professional Analysis Software
Support pipe cross-section in real-time representation and a full
360-degree profile extendable (IMG. 1)
Automatically generate pipe 3-D modeling and view debris and defect
inside clearly (IMG. 2)
Support debris volume calculation & analysis data to be plotted
easily (IMG. 3)
Automatic reporting for high efficiency report preparation (IMG. 4)