Carrier 30hxy/Hxc Screw Chiller Commercial Refrigeration Condensing Units
Brand Name:Famous
Certification:CE
Model Number:30HXY/HXC
Minimum Order Quantity:1 (pieces)
Delivery Time:30 work days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
No. 328 on the 4th plant hengyong Road, Jiading District, Shanghai
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Nowadays, there are many hotels, baths, office buildings, schools, hospitals and factories. At the same time, there are air-conditioning centralized cooling and domestic hot water supply. Carrier launched 30HXC total heat recovery screw unit, through the discharge of water chillers into the atmosphere The condensed heat is recovered to make hot water, which makes the energy of central air conditioning effective. Using, the energy consumption of users is greatly reduced, the economic benefit is effectively improved, and at the same time, it can be reduced. Environmental pollution caused by condensation heat. 30HXC total heat recovery screw unit is energy-saving. New choice of environmental protection air conditioning system.
Working principle of Carrier 30HXC full heat recovery screw chiller Carrier 30HXC full heat recovery screw chiller adopts single-cylinder double-loop condenser. Structural design, by adding a heat recovery loop to recover all condensation heat. As shown in the figure The unit with heat recovery option is shown. There is hot water in and out on the condenser. Interface, convenient for users to install and use.
Flowchart of Carrier 30HXC Total Heat Recovery Screw Chiller System When cooling: turn on the cooling water pump and turn off the hot water pump. The unit is in refrigeration priority mode. Run. Heat recovery: turn on the hot water pump and turn off the cooling water pump. The unit can give priority to refrigeration. Mode operation, controlling the outlet water temperature of evaporator; It can also be transported according to the heat recovery priority mode. Ok, control the temperature of hot water.
In winter, there are suitable low-temperature heat sources (such as groundwater, surface water, soil source, medium) Water, etc.) can be used, the low-temperature heat source water can be connected to the evaporator of the unit, through the whole Preparation of high temperature hot water by heat recovery unit. In this case, the total heat recovery unit can be completed. Completely replace the boiler and make hot water all year round.
Option description
The water chamber interfaces of evaporator and condenser can be
reversed respectively.
The standard unit water chamber interface is on the right side of
the unit (with the control cabinet as the front), and this option
provides the left water chamber interface.
Evaporator and condenser water chamber can provide
1.6MPa/2.1MPa high pressure option.
Cryogenic unit
Outlet temperature range of low-temperature ethylene glycol or salt
solution evaporator: -6℃~+4℃
Some models can provide the lowest temperature option of -10℃ to
meet the needs of process refrigeration application.
Silent cabinet
The first generation of quiet speakers can reduce the noise of the
unit by more than 10dB(A) on average: the installation and
disassembly are convenient, which has no influence on the
maintenance and management of the unit and has a beautiful
appearance (see P3 in this book).
First generation static speaker
| model | measure(mm) | weight(kg) |
| 30HXC050-065E | 2505*1150*2100 | 480 |
| 30HXC080E-110E | 3105*1150*2100 | 500 |
| 30HXC130E | 3575*1192*2143 | 600 |
| 30HXC165E | 3315*1192*2143 | 600 |
| 30HXC200E | 3575*1192*2143 | 600 |
| 30HXC250E | 3724*1221*2212 | 700 |
| 30HXC300E | 4224*1221*2212 | 700 |
| 30HXC350E-400E | 5800*1300*2300 | 1000 |
Unit hoisting
Note: Each chain hoist must be able to bear the full weight of the
machine.
The center of gravity of the unit should be placed on the bearing
beam.
It is forbidden to use the lifting lug on the condenser for
lifting.
Note: Each lifting chain must be able to bear the full weight of
the machin
The center of gravity of the unit should be placed on the bearing
beam.
It is forbidden to use the lifting lug on the condenser for
lifting.
(mm)
| model | X | Y | Z | W | L |
| 30H110CH-HR | 1348 | 590 | 935 | 2000 | 1200 |
| 30H130CH-HR | 1781 | 603 | 935 | 2000 | 1200 |
| 30H165CH-HR | 2090 | 605 | 906 | 2000 | 1200 |
| 30H200CH-HR | 1615 | 616 | 867 | 2000 | 1200 |
| 30H250CH-HR | 1971 | 576 | 1035 | 3500 | 1200 |
| 30H300CH-HR | 1971 | 576 | 1035 | 3500 | 1200 |
| 30H350CH-HR | 2259 | 569 | 808 | 3500 | 1200 |
| 30H400CH-HR | 2259 | 569 | 808 | 3500 | 1200 |
Product application advantages
Carrier 30HXC screw chiller is characterized by its chlorine-free
(no consumption of ozone layer at all) and high efficiency (less
power consumption).
Contribution to greenhouse effect), high reliability, easy
maintenance, low operating cost, etc., and it is a hotel,
restaurant. The central air conditioning system is the first choice for shops,
offices, schools, hospitals, industrial and mining enterprises and
many other occasions.
Design for R134a Environmental Leading Refrigerant
R134a has no damage to the ozone layer at all.
R134a has no damage to the ozone layer at all. R134a products are increasing year by year, and there is no prohibition period.
Carrier 30hxy/Hxc Screw Chiller Commercial Refrigeration Condensing Units
Inquiry Cart
0