High Pressure Retrievable Packer RTTS Packer Oilfield Mechanical Set Double Grip

Oilfield Mechanical Set Double Grip High Pressure Retrievable Packer RTTS Packer

Function and Operating Principle of Double Grip High Pressure Retrievable Packer

The Construction of the Full Bore Mechanical Setting Packer is named as RTTS packer. The mechanical set double grip is shown in the accompanying figure. When starting the RTTS packer into the hole, place J-slot in the drag block sleeve in the locked position. The tool is run slightly below the desired setting position and is then picked up tool to setting position and rotated pipe several turns to right(on bottom, only 1/2 turn is required).Holding right torque in pipe, slack off the pipe weight until mechanical slips on the tool set and start taking weight .At the same time the packer element is compressed against the wall of the casing, then the packer can isolate the annular from the test zone. Self-guard hydraulic hold down mechanism can prevent the packer from bouncing up because of the high pressure below the packer. When it is extra, pressure can be into the annular space between the volume tube, hydraulic hold down body and the lower mandrel through the radial hole on the lower mandrel, then to reach the round hydraulic hold down slip and compress the slip retractor spring, then the round hydraulic hold down slip lean against the inside wall of the casing closely and help prevent the tool from being pumped up the hole.

Technical parameter of Double Grip High Pressure Retrievable Packer

Operation Method of the RTTS Packer

* Before the retrievable packer is run into the well, it should be hung up, shift the drag block sleeve high and lower for may times, check whether the mechanical slip moves flexibly.

* When starting the RTTS packer into the hole, locking open the circulating valve. Place J-slot in the drag lock(or drag spring) sleeve in the locked position. The slip should be in the shrinkage state.

* During running into the hole, slippage will tend to set slips and close the circulating valve. To reopen circulating valve when it has inadvertently been closed. you must pick up the tubing and turn to right, then picks the tubing up to the position, which the circulating valve is open. Turn tubing to left to the locking open position. Take care not back off tubing.

* When the tool is run to the test position and ready for operation, run it slightly below the desired setting position at first, then pick it up to the setting position.

About Techcore Oil Tools

Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.

* Techcore insist on superior quality, strong packing & timely delivery.

*Third party inspection is available from SGS, BV, DNV etc.

* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the customers' benefits

* Techcore supply the cost effect products with 12 months guarantee

* Techcore insist on the traceability of each Drill stem testing tools and related DST parts

from the raw material to the finished products to meet on requirements of onshore and offshore standards.

Inspection of the Drill stem testing tools

Oilfield Mechanical Set Double Grip High Pressure Retrievable Packer RTTS Packer

ZZ Top Oil Tools Co.,Ltd as head office registered in Xi’an City in 2010, and in 2016, ZZ TOP OIL TOOLS enlarged the downhole oil tools factory under the Brand - TECHCORE in Baoji, which engages in designing and manufacturing the downhole oil tools including DST tools, Coiled tubing tools etc.

As one group, ZZ TOP provides the clients highly efficient & expertise service as well as more comprehensive products to meet the customers' requirements during the work, and insists on "Traceability, Serialization" for each tools and related parts

Equipments List

Techcore specialized in design, manufacture and sales of the oil well downhole tools as below:

* Drill stem testing tools for cased hole, open hole and slim hole:

Retrievable packer, circulating valve,safety joint, downhole tester valve,LPR- N Valve, multi-cycle circulating valve, hydraulic jar, shock absorber, RD safety circulating valve,CHAMP packer, IPO valve, tubing string test valve, drain valve,RD sampler, super safety valve etc.

* Coiled Tubing Tools: Double slip connector, roll on connector, roll on x thread connector, double flapper check valve, motor head, dual function circulating valve, hydraulic jar, fishing tools etc.

* Perforating tools: Various perforator & perforating gun system, Shaped Charge Body

*Oil well completion tools include: Subsurface safety valve, wireline retrievable subsurface safety valve, single string production packer, dual strings production packer, ESP packer, mechanical set packer, permanent packer, compensation device, bridge plug, sliding sleeve, nipples etc.

DST Tools Warehouse