Low Cutting Resistance Cnc Turning Tools Inserts For Heat Resistant Alloys Semi Finishing

CNC Carbide Turning Inserts for Heat Resistant Alloys Semi Finishing with Low Cutting Resistance

Application:

• ISO S materials, preferred for semi-finishing of superalloys, Heat Resistant Alloys.

Technical Information:

• Material Classification: S1.0 - 3.0
• Heat resistant alloys can be divided into three groups:
  • Cobalt based alloy:
    • Cobalt-based alloys have the best high temperature properties and corrosion resistance and are mainly used in the medical industry.
  • Iron-based alloy:
    • Iron-based alloys have evolved from austenitic stainless steels with the highest temperature strength characteristics.
  • Nickel-based alloy:
    • The most widely used. More than 50% of the weight in aircraft engines is made of nickel-based alloys. Typical materials are Inconel 718, 706 Waspalloy, Udimet 720, etc.
    • Characteristics: Increased alloy content (Co, Ni), which has better heat resistance and higher corrosion resistance, and increased tensile strength.
    • State: annealing, solution treatment, aging, rolling, forging, casting.
    • Machining performance:
    • Due to the chemical nature of the alloy and the specific smelting process used in the manufacturing process, the physical properties and processing properties of each material vary considerably.
    • Annealing and aging treatment have a large impact on subsequent processing characteristics.
    • Difficult chip control, cutting force and required power are very high.
    • The processing difficulty of cutting performance increases in the following order: iron-based alloy, nickel-based alloy, cobalt-based alloy.
    • Poor thermal conductivity and high strength during processing can cause high temperatures. The high strength, work hardening and adhesion hardening properties result in groove wear at the maximum depth of cut and the cutting edge in an extremely harsh environment.
    • All materials have high strength at high temperatures and produce jagged chips during the cutting process, which results in high dynamic cutting forces.
    • In general, use a small lead angle blade, such as a round blade, and select the positive rake insert geometry.
    • Always use coolant. The coolant flow should be high and spray directly onto the cutting edge.

Feature Advantage:

• Chipbreaker SM:
  • G-class precision chipbreaker type, precision grinding.
  • The chipbreaker surface is smooth, the insert is smooth, and the chip breaking is good.
  • The cutting edge is sharp and the cutting resistance is small, which can effectively reduce the groove wear.
  • The cutting edge adopts a variable rake angle design to increase the edge strength at large depth of cut. As the depth of cut increases, the edge strength increases.
  • The large groove width combined with the unique edge reinforcement design not only has excellent chip breaking performance, but also effectively improves the edge strength.

• Grades:

• Types:
  • ISO standard turning inserts are available in a variety of conventional types
  • Different insert arcs of various specifications (R0.2, R0.4, R0.8, R1.2, etc.)

Recommended Cutting Parameters:

• The following cutting parameters are the recommended range values. Appropriate adjustments and selections should be considered after considering the following factors:
  • Specific physical properties of the material being processed
  • The actual condition of the part blank
  • Power and rigidity of the machine tool
  • Clamping rigidity of tools and workpieces
  • Balance between tool life and machining efficiency

Since inception, ZHUZHOU MMM NEW MATERIAL CO., LTD. is always targeted to be an excellent supplier of cutting tools. We continuously improve product performance, product quality controls, company’s management and team building.
The company has a high quality and professional technical team engaged in machinery industry for many years. On the basis of giving full play to the advantages of its technical service ability, we have been formed full range of products from blank to product, primary to high precision and so on which are including saw brazed tip, brazed tip, insert, CNC tool, tool system and solid carbide etc. At the same time, we also have ability to provide customers with customized cutting tools, design, customization and OEM services according to the actual needs of customers.