IP67 Protection QJJ200 Series Tilt Sensor For Measuring Angle Surface High Vibration Resistance

QJJ200 Series tilt sensor

Product introduction
QJJ200 Series tilt sensor is MEMS tilt sensor for measuring the angle between the measured surface and the horizontal plane. Embedded MCU control system, the compensation temperature range within (-45 ℃ ~+85 ℃), meanwhile doing the secondary non-linear correction to improve the overall accuracy of the sensor.
For dual-axis tilt sensor, QJJ200 adopt the definition of inertial navigation system of pitch angle and roll angle calculation method, other than a simple 2-axis mechanical combination to meet the measurement needs of a variety of control areas.
This sensor adopt to the sensitive gravitational theory, which can output the current relative horizontal attitude angle in real time, easy to install and use, resistance to external electromagnetic interference, can be adapted to the harsh environment and long-term work in the industrial. This kind of tilt sensor is ideal for industrial automation and control, platforms, and other areas of attitude measurement. The sensors are mainly suit for measuring static and dynamic measurement of slow change, not suit for dynamic measurements for rapid change.

Feature
Wide power input range, DC 8 ~ 30V
Wide operating temperature, -45 ℃ ~ +85 ℃
Resolution better than 0.1 °
Long-term stability better than 0.3 °
IP67 protection class
High vibration resistance> 10000g
Range ± 30 °, ± 90 °, ± 180 °, 0 ° ~ 360 ° (vertical plane rotation) Optional
Output: analog voltage 0 ~ 5V, current 4 ~ 20mA, RS232, RS485 optional
Output protocol: RS232/RS485 digital output mode for the product, the output data protocol according to user
needs, a standard Modbus-RTU protocol or user-defined protocol selected.

Performance indicators

Ordering information
Item: QJJ200
Measuring axis: 1). single,
2). biaxial,
3). vertical plane rotation
Measuring range: 030: ±30°
090: ±90°
180: ±180°
360: ±360°
Output: AOV: Voltage 0~5V
AOI: current 4~20mA
232: RS232 interface
485: RS485 interface
CAN: CAN interface
For example: QJJ200-2)-090-485, Biaxial/±90°range/RS485 interface tilt sensor

Dimension
Housing material: aluminum oxide matte black Installation: 4 M4 screws
Connector: 50cm straight lead

Company Information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof, etc. which assure our products are conform to the international standards.

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. We have experienced technical and management personnel, through the efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Currently, Kacise sensor is already exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regards “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.