Product Details
Radar Level Meter 80G Frequency Modulation High Accuracy Small
Blind Area and with large range for strond dust area
Introduction
76-81 GHZ frequency modulation wave FMCW radar products (also
called a millimeter wave radar), because it USES higher than Ku
band radar frequency millimeter wave band, the remote target
detection, strong smoke dust environment, remote imaging, the
respect such as multi-spectral imaging have important applications,
and can detect more than microwave radar small goal and achieve a
more accurate positioning, with a higher resolution and more
privacy.
Application field
- The emission angle is less than 3 °, which is suitable for narrow
space or guided wave pipeline measurement
- Measuring range could reach to 120M, which is suitable for the
measurement of large storage tanks
- Measurement dead zone is in the range of 7-8CM, suitable for the
measurement of small storage tanks
The product has extremely high measurement accuracy, suitable for
high-precision measurement level measurement - The product has rich echo processing algorithms and empirical data
of various working conditions; it has unique advantages than other
similar products in the application of extremely harsh working
conditions such as strong dust, steam, or special process storage
tanks with stirring and heating rods.
Features of 80G Radar Level Sensor
- 76GHz-81GHz FM wave radar
- 5GHz ultra-large FM scanning frequency width, wide application
- Support standard HART, RS485 / MODBUS bus protocol
- Support operation mode such as upper computer setting software,
tank side table, etc.
- 24VDC power supply
- Simple installation structure, adapt to various installation forms
on site
Parameters
Frequency | 76GHz~81GHz,FM sweep frequency width 5GHz |
Range | 0: 0.2 m~60m(Solid)(T0 Series blind area add 0.2m) 1: 0.0 m ~30m(Liquid)(T0 Series blind area add 0.2m) 2: 0.6m~120m(Solid)(T0Series blind area add 0.2m) |
Accuracy | ±1mm |
Beam Angle | 3°,8° |
The usage dielectric constant range | >=2 |
Power Supply | 18~28.0VDC, 4 wire 2 wire |
Communication Mode | MODBUS HART |
Signal Output | 4~20mA or RS-485 4~20mA |
The Fault Output | 3.8mA,4mA,20mA,21mA, maitain |
Field operation / programming | 128×64 dot matrix display /4 button Upper computer setup software can be configured |
Temperature/humidity | -40~85℃/≤95%RH |
Shell material | Alluminum alloy, stainless steel |
Antenna Type | Lens antenna, can be equipped with lens antenna
shield/anti-corrosion antenna/antenna cooling paste/quartz
isolation flange |
Process pressure | -0.1~2MPa |
Outline | Ø100*270mm |
Cable Connection | M20*1.5 |
Commend cable | AWG18 or 75mm² |
Protection Grade | IP67 |
Explosion Grade | ExdiaIICT6 |
Installation | Screw or flange |
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof, etc. which assure our products are conform to the
international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
Our Services
- Your inquiry will be replied in 24hours.
- Well-trained and experienced staffs to answer all your enquires in
fluent English.
- OEM&ODM, we can help you to design and your request will be put
into product.
- Distributorship are offered for your unique design and some our
current models.
- Protection of your sales area, ideas of design and all your private
information.
- Discounts are offered based on order quantities.
- We provide paid repair services for meter damages not arising from
manufacturing quality issues or meter damages not within the scope
of warranty.
Company Profile
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of
measuring instruments , located in China xi’an City. Since 2008,
Xi'an Kacise focused on the development and production of pressure,
level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical
and management personnel, through efforts of our entire staff, we
have become a professional measuring instrument manufacturer and
solution provider. And we are continuously trying to improve
product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof certificates, etc. which ensure that our products
comply with international standards.

Kacise sensors have already been exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regard “reasonable prices, efficient production time
and good after-sales service” as our tenet, and hope to cooperate
with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices,
and provides industry-leading customer service. We personally get
to know each of our customers, and we know how to discover the most
valuable part of our business , to help others achieve their goals.