KNT600 online turbidity meter turbidity sensor water quality sensor 4-20mA / RS485 communication

KNT600 online turbidity meter turbidity sensor water treatment
Production Introduction
The turbidity meter KXTX00 series,an online measuring instrument designed for the concentration of suspended solids.
The optical system of the turbidimeter consists of a tungsten filament lamp, a 90° detector for monitoring scattered light and a transmission light detector.The turbidimeter microprocessor calculates the signal ratio from the 90° detector and the transmission photodetector.The ratio calculation technique can correct the interference caused by chromaticity and light-absorbing substances (such as activated carbon) and compensate the influence caused by the fluctuation of light intensity, providing long-term calibration stability.The optical system of turbidimeter also requires to reduce the drifting light and improve the accuracy of test.
After the light wave sent by the transmitter on the turbidimeter sensor passes through the absorption, reflection and scattering of the measured objects in the transmission process, part of the transmitted light can illuminate the detector in the direction of 180° and part of the scattered light scatters to the detector in the direction of 90°.The light intensity received on the 180° and 90° direction detector has a certain relationship with the turbidity of the measured sewage, so the turbidity of the sewage can be calculated by measuring the intensity of transmitted light and scattered light.

Typical applications
It is used to measure the turbidity of water during the treatment of municipal sewage, industrial wastewater, and industrial slurry.
Measurement of turbidity of backwash water of filter in waterworks.
Turbidity measurement of water and sedimentation tank effluent;Industrial production process,
Water quality of circulating cooling water.
● Using scattered light and transmitted light detection technology
● Optional self-cleaning (air or water flushing) function
● Chinese/English smart menu operation
● Data recording/upload function
● Various automatic calibration functions
● Three sets of relay control switches
● High limit, low limit, hysteresis control
● 4-20MA /RS485 various signal output modes
● Password protection can be set to prevent non-staff misoperation


Measuring principle

Features:
1. The use of multi-beam mutual compensation technology can eliminate measurement errors caused by light window sticking, as well as temperature changes and components
Parts aging and other effects
2. LCD display, Chinese menu operation, stable performance, strong reliability, convenient operation for workers
3. The throw-in sensor is easy to install, has high accuracy, good repeatability and strong anti-interference ability
4. Support 485 communication 4-20mA analog output/support HART protocol/NB.GPRS.LORA communication (function option)
5. Complete product series, with corresponding sensors for different concentration ranges, and wide measurement range.
The sensors of the turbidity meter are mainly divided into three categories according to the different measuring ranges
Throw-in single beam sensor is suitable for turbidity measurement less than 1000NTU,
The signal is transmitted and received at a 90° right angle,
Use the scattered light generated by the colloidal particles suspended in water to calculate the turbidity value,
The input sensor is simple to use, easy to install and easy to maintain.

It can also be used to measure the concentration of sludge, support different units, different ranges of customization.


Turbidity meter size structure diagram

Turbidity meter technical parameters

Ordering Information Selection Table

Contact us
Website: www.kacise.com
Phone: +86-17719566736
Email: sales@kacise.com
Location: Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China


Abbreviations table
NTU
The unit of turbidity is "degree", which is equivalent to the degree of turbidity produced by 1L water containing 1mg SiO2 (or white clay, diatomite), which is 1 degree, or Jackson.Turbidity unit is JTU, 1JTU=1mg/L white clay suspension.
The turbidity shown by modern instruments is the unit of scattering turbidity NTU, also known as TU.1NTU= 1JTU.
Recently, it is considered internationally that the standard of turbidity prepared with ullotropin-hydrazine sulfate has good reproducibility and is chosen as the uniform standard of FTU.1FTU=1JTU.

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.