INCONEL Alloy 751 N07751 For Exhaust Valves Of Internal Combustion Engines

INCONEL alloy 751 (UNS N07751) is a precipitation hardenable nickel-chromium alloy, used mainly for the exhaust valves of internal combustion engines. The alloy has essentially the same excellent physical, mechanical and corrosion-resistance properties as INCONEL alloy X-750. Its thermal
properties correspond closely to those published for INCONEL alloy X-750.

In the evaluation of materials for exhaust valve applications, nickel-chromium alloys have performed well in a 1675°F (913°C) lead oxide screening test. INCONEL alloy 751 repeatedly offered good results, with corrosion rates averaging 4.31 g/dm2/h. Like other nickel-chromium alloys, INCONEL alloy 751 also resists attack by other exhaust stream impurities such as sulfur, bromine and chlorine.

Chemical composition

INCONEL alloy 751 has excellent hot hardness. As a result, hard facing of valve seat areas for good wear-resistance is unnecessary in most applications.

Tensile Properties

Hot working

The hot working range for INCONEL alloy 751 is 1800-2200°F (980-1205°C). The alloy should be reheated to 2200°F (1205°C) whenever its temperature falls below 1800°F (980°C).

Machining

INCONEL alloy 751 is readily machined in the as-hot finished condition. The best procedure is to machine to slightly oversize, precipitation heat treat, then finish to size. A slight permanent contraction (about 0.0003 in/in) takes place during precipitation. Precipitation treated material can
be finish machined to fine finishes and close tolerances, and will have good dimensional stability.

Joining

INCONEL alloy 751 can be joined by the flash butt welding procedures commonly used in valve manufacture. The alloy can also be inertia welded.

Heat treatment

All properties listed in this publication were derived from material direct aged for two hours at 1350°F (732°C). This short-time heat treatment has been found to produce material with the optimum combination of properties consistent with economy. Longer, more complex, aging treatments may be used to improve specific properties required for particular applications. Please consult Special Metals Corporation for further information.

Available forms at A-ONE ALLOY

Round bar, forging, seamless pipe

Suzhou Xunshi New Material Co., Ltd (refered as Xunshi afterwards) is a professional supplier of high performance alloys. Our factory is specialized in manufacturing Nickel alloys & Cobalt alloys for 10⁺ years，with a company mission to provide a high quality, reliable source for precision alloys, high temperature alloys and stainless steels in both pilot run and mass production. We are professionally manufacturing materials with unique features, which are then used in aerospace, military, electronics, marine, petroleum and petrochemical industries.

Base on “Quality-oriented, Leading Technology, Continuous Improvement, Customer Satisfaction”, we believe Xunshi could be your best supplier.

Product Scope of Xunshi

· Inconel

· Hastelloy

· Incoloy

· Monel

· Nimonic

· Nitronic

· Haynes

· Special Stainless Steel

· Soft Magnetic Alloy

· Permanent Magnetic Alloy

· Elastic Alloy

· Controlled Expansion Alloy

· Magnetostrictive Material

Services of Xunshi

· Material selection

· Non-standard product research and pre-production

· Hard to find material sourcing

· Cutting/splitting

· Precision machining

· Heat treatment

· Customized Packing

· Logistics service

Advantages of Xunshi

· Experienced in industry

· Quality control system

· Authorized Certificates

· Guaranteed delivery and quality

· Customers from 30+ countries trust us

Xunshi is engaged in introducing China-origin high performance alloys to the entire world. Choose Xunshi, choose high performance.