

Add to Cart
Cisco Small Business WAP561-C-K9 Access Point WAP561 Wireless-N Dual Access Point With Single Point Setup
Cisco WAP561 Wireless-N Dual Radio Selectable-Band Access Point with Single Point Setup
Specifications | Description | |
Ports | 2 LAN Gigabit Ethernet auto sensing | |
Antennas | Internal antennas optimized for installation on a wall or ceiling | |
Ports | 10/100/1000 Ethernet, with support for 802.3af PoE | |
Physical dimensions (W x D x H) | 9.05 x 9.05 x .98 in. (230 x 230 x 25 mm) | |
Weight | WAP551: 1.41 lb or 640g | |
VLAN support | Yes | |
Number of VLANs | 1 management VLAN plus 16 VLANs for SSIDs | |
Layer 2 | 802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN | |
Wireless throughput | Up to 450 Mbps data rate | |
Recommended user support | Up to 64 connective users, 30 active users per radio | |
Single Point Setup | Yes | |
Number of access points per cluster | 16 | |
Active clients per cluster | 480 | |
Web user interface | Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) | |
Frequency | WAP561: Dual concurrent radios (2.4 and 5 GHz) | |
Radio and modulation type | Dual radio (WAP561), orthogonal frequency division multiplexing (OFDM) | |
WLAN | 802.11b/g/n 3x3 multiple-input multiple-output (MIMO) with 3 spatial streams 20 and 40 MHz channels PHY data rate up to 450 Mbps 802.11 dynamic frequency selection (DSF), EU version only | |
Internal antennas | 5 internal dipole antennas for the WAP551 and 10 antennas for the WAP561 | |
Antenna gain in dBi | 5 dBi each antenna | |
Multiple SSIDs | WAP561: 16 x 2 | |
Access point | Access Point mode, WDS Bridging, Workgroup Bridge mode | |
Power options | IEEE 802.3af Ethernet switch Cisco SB-PWR-INJ2-xx POE power: WAP561: 11.1W | |
System memory | 64 MB RAM 32 MB flash |