48V Wind Solar Hybrid Controller , Charge Controller For Wind And Solar Power Systems

Brand Name:Yo Power Electrical
Certification:CE, ROHS, FCC
Model Number:YQHCN2-1/48
Minimum Order Quantity:1 unit
Delivery Time:Within 3 days for 1~10 units
Payment Terms:L/C, D/A, Western Union, T/T, MoneyGram, Paypal
Contact Now

Add to Cart

Active Member
Location: Hefei Anhui China
Address: Room 4022-4026, R&D Center, 2700st Chuangxin Avenue, High-tech Zone, Hefei City, Anhui Province, P. R of China.
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

48V Wind And Solar Hybrid System Controller With 2KW Wind + 1KW Solar

This wind and solar hybrid system controller is special designed for 48V off-grid wind solar hybrid power system with 2kw wind generator and 1kw solar panel.


1. Features

1.1 Basic Functions

  • Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization

There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power

  • Protect wind generator from over-revolution speed, over-voltage and over-current

Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator

  • Intelligent limiting of batteries max current

Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected

  • function of manual brake
  • Wind charging manual switch
  • Solar charging manual switch

1.2 Optional Function

  • USB function
  • RS232 interface
  • RS485 interface
  • Anemometer function

2. Parameters

ModelYQHCN2-1/48
Rated system voltage48V
Rated wind generator power2KW
Rated solar panel power1KW
Battery low voltage disconnect40.8V
Battery low voltage reconnect46.5V
Equalize charging voltage (absorption)58.8V
Equalize charging recovery voltage52.8V
Float charging voltage54.0V
Wind dumpload rotate speed500R
Wind pole logarithm10D
Wind starting charging voltage20V
Wind dumpload voltage100V
Dump load control model

Over rotate speed limiting, over voltage limiting

Over current limiting, PWM

Wind charging technologyPWM
Solar charging technologyPWM
DisplayLCD
Display content

Battery: voltage, charging current, battery power

Wind: voltage, charging current, rotate speed,

output current&power

Solar: voltage, charging current

System: status, generation power, error code

Ambient temperature-20℃~55
Humidity35~85%, non-condensing
Standy by consumption≤3W
Protection type

Battery: over-discharge, over-charge, anti-reverse connection

Wind: Over rotate speed, over voltage, over current

Controller size423*450*175mm
N.W16KG
Packing size510*250*545mm
G.W18KG
Optional functionRS232, RS485, USB, Anemometer
Warranty2 years
  • Remark 1: the parameters are marked in Red color can be adjusted by users according to different requirement of different battery
  • Remark 2: If you have wind solar hybrid power generation project but don't know how to choose a right mode, please tell us the information of solar panel and wind generator in the system, we will recommend right model for you.

3. About the dump load

The dump load is in side the controller because the wind generator power not exceed 5000W


4. Application

Off grid wind solar hybrid system

Independent Wind generation system

China 48V Wind Solar Hybrid Controller , Charge Controller For Wind And Solar Power Systems supplier

48V Wind Solar Hybrid Controller , Charge Controller For Wind And Solar Power Systems

Inquiry Cart 0