ABS Snap Grounding ESD UK US EU Industrial Plug Yellow Color

Excellent Quality Yellow Color ABS Snap Grounding ESD UK US EU Plug

ESD UK US EU Plug Excellent Quality Yellow Color ABS Snap Grounding

Description :

Features:

1. The plug fits directly in to the mains supply socket, connecting with only the earth conductor. Live and Neutral pins have been
molded in insulating plastic, fitting into the supply socket but completely dormant.
2. At the front of the plug are connectors linked via 1M Ohm resistors to the earth pin, inside the plug. The connectors offer a
link to ground for connecting cords from the EPA.
3. The1M Ohm resistor to each connector offer protection in the event the workstation becomes live. That protection would limit the
current to less than 0.3mA at 240 volts. Should the fault current continue the resistor will open circuit.
4. Insert the plug into the supply socket making sure it is fully home, then connect the various elements of the EPA... For example
wrist strap cord, bench or floor matting connection cords. This ensures that the EPA is at the same earth potential.
5. As generally the workstation has more than one plug socket it is possible to use more than one EBP if more connections are
required.
6. The EBP is sealed and cannot be opened for repair. To test each connection use a multi-meter from the connector to the earth
pin. The reading should be between 0.9 and 1.1M Ohms. As each connection point has its own 1M Ohm resistor, the resistance between
two connectors should be approximately 2M Ohms.

NOTE:

The plug must only be used for ESD control purposes.

More picture :

Other Products we Supply:

1. Cleanroom Apparels(Disposable, Launderable).
2. Cleanroom Documentation(Paper, Pen, Notebook).
3. Cleanroom Gloves(Finger Cots, PU Coated Glove, PVC Dotted Glove).
4. Cleanroom Mats(Sticky Mat, Table/Floor Mat, Anti-fatigue Mat).
5. ESD Package Materials(Bags, Tapes etc).
6. ESD Storage Materials (Bins, Trays, Circulation Box, Solvent Dispensers).
7. Cleanroom Cleaning Supplies(Wipes, Tacky Rollers, Mops, Brushes, Swabs).
8. Cleanroom &ESD Chairs/Stools.
9. ESD Wrist/Heel Straps/Grounding Cords.
10. Static Control Ionizing Blower/Gun/Nozzle.
11. Illuminated Magnifier.
12. Cleanroom Curtain and etc.

Our company profile

Established in 2011,Suzhou Quanjuda Purification Tech Co,.Ltd is located in SIP Suzhou,one of the most dynamic cities in eastern coast of China,set up offices in the number 668, Fengting Avenue.
As a leading manufacturer and exporter of ESD & Cleanroom products, we offer a full line of ESD & Cleanroom equipment and supplies, providing comprehensive services by manufacturing, sourcing and exporting products from China.

Our popular product categories

Customer visits, factory visits, and visiting customers to leave photos

Other Products we Supply:

1. Cleanroom Apparels(Disposable, Launderable).
2. Cleanroom Documentation(Paper, Pen, Notebook).
3. Cleanroom Gloves(Finger Cots, PU Coated Glove, PVC Dotted Glove).
4. Cleanroom Mats(Sticky Mat, Table/Floor Mat, Anti-fatigue Mat).
5. ESD Package Materials(Bags, Tapes etc).
6. ESD Storage Materials (Bins, Trays, Circulation Box, Solvent Dispensers).
7. Cleanroom Cleaning Supplies(Wipes, Tacky Rollers, Mops, Brushes, Swabs).
8. Cleanroom &ESD Chairs/Stools.
9. ESD Wrist/Heel Straps/Grounding Cords.
10. Static Control Ionizing Blower/Gun/Nozzle.
11. Illuminated Magnifier.
12. Cleanroom Curtain and etc.

About Us

Established in 2011, Suzhou Quanjuda Purification Technology Co., LTD is a leading manufacturer and exporter of various ESD & Cleanroom products, offers a full line of ESD & Cleanroom equipment and supplies, providing comprehensive services by manufacturing, sourcing and exporting products from China.

FAQ

● Q1: Are you a manufacturer?
①.Ans:Yes, we have been in manufacturing and providing excellent Cleanroom and ESD solutions for customers more than 10years.
②.Our own production plants and a wide network of suppliers who are strictly selected, are totally qualified for ISO Quality Management System.
● Q2: How long could you prepare samples?
Ans:Normally 1days if we have the sample onhand. If customized one, about a week around.
● Q3: How about batch order production?
Ans: Normally 3-7days or so
● Q4: Do you inspect the finished products?
Ans:Yes, we will do inspection according to ISO standard and ruled by our QC staff.
● Q5: How do you ship the goods?
Ans: By sea, by air, by truck or by courier (UPS, DHL, Fedex, TNT etc.)
● Q6: What advantage do you have?
Ans:
①.We have professional engineers, customers can expect the best possible advice and support.
②.Related responsible team to answer all your questions and follow-up process for you and do update in time
③.Strict and standard process control according to Quality Management System.
④.Documents support on products, we have strong technical data sheet to support our products,

which could make you easier to know our products.

We handle all Sourcing and Manufacturing activities with the collaboration of our team members based in Suzhou. We serve a wide range of customers, including Flextronics, Foxconn, Samsung, Seagate, Philips, LG, ZTE and many other Pharmaceutical Companies, Universities Labs and etc.

Our customers always can expect the best possible advice and support. We enjoy a high level of retention with our customers by providing high quality services, ensuring continuity of supply and working cost effectively.

No matter what industry you work in
-Aerospace
-Electronics
-Medical device
-Pharmaceutica
-Semi-conductor
-Biotech
-Food processing
-Iniection molding
or any of the other numerous high tech fields
We have the products suitable for your environments