Add to Cart
1. 6 function buttons, 4 three-position or two-position rotating switch, stop, rotary start switch 2 five-step joysticks with 10 million times of mechanical life and pure proportion.
2. Control contact is up to 40.
3. With battery voltage warning device, the power supply is cut off during low power.
4. Safety switch key is to prevent from unauthorized user.
5. Program the button function by computer software.
6. The spare buttons can be programmed to normal, toggle, interlock or start, etc.
7. Start button can be program to be start, normal, toggle function etc.
8. Installed with proportional module for analog signal output (optional)
Frequency range | VHF: 310~331MHz; UHF: 425~446MHz |
Safety code | 32 bits (4.3 billion) |
Transmitted power | ≤10dBm |
Receiver sensitivity | -110dBm |
Safety code | 32 bits (4.3 billion) |
Transmitter power supply | 4 AA batteries |
Receiver power supply | 18~65VAC/DC,65~440VAC/DC(optional) |
Output contactor capacity | 8A sealed relay output (with AC 250V/10A relays, 10A fuse) |
Cable lengtht | 2.5 meters |
Control distance | Approx200m(300 meters is customized) |
Material | Glass-Fiber PA |
Enclosure protection class | IP65 |
Temperature range | -40℃~+85℃ |
Transmitter Dimension | 210 x 152 x 128mm |
Transmitter Weight | 980g(without batteries) |
Receiver Dimension | 320x253x107mm |
Receiver Weight | 2020g |
Certifications
F24 series remote control system have 80 channels in its frequency range. Even in situation where many sets of remote control are used in the same time, working channel can be easily chose without interfering with other signals and hundred-percent safe and reliable. With advanced design and high quality components, the system is durable and easy to operate. It can easily adapt to complicated and harsh industrial environment such as extra-high/low temperature,dusty,strong vibration,greasy,heavy humidity,etc.
Transmitter and receiver have many function used in conjunction. The emergency stop button is located in the upper left of transmitter which meets the safety and egonomics. When stop button is pressed, the system stop working immediately and unconditionally. Transmitter is equipped with a shell of more consistent with ergonomics. The new shell material is more durable, lighter and thinner.
There are 30 types of different of configurations based on customer's requirements. Maximum 20 control contacts are sufficient of meet most of requirements. The technique, function, security and flexibility satisfy all your requirements. It is the most advanced remote control system.
Crane Remote Control are used for tower cranes, overhead cranes, concrete pumps, concrete mixers, shipyard, etc., for industrial, agricultural, clean, drainage and other industries.
Application
1. Overhead Crane Remote Control
Overhead crane is one of the most widely used areas of industrial
overhead crane radio remote control systems. In particular, in
metallurgy, automobile manufacturing, paper mills and material
warehouses, are all equipped with industrial overhead crane radio
remote control systems.
2. Mobile crane, truck crane wireless radio remote control system
Typically, the large car crane remote control system is also
equipped with a data feedback device, the feedback device can be
displayed on the operating system display system, the operator can
monitor the data according to the display.
3. Concrete pump truck wireless radio remote control system
The traditional mode of concrete pump operation to be completed
with the number of people, low efficiency, limiting the performance
of concrete pump truck to play. The use of industrial remote
control device can maximize the machine's performance. The driver
locates the truck, then carry the remote control system to operate
concrete pump truck.
4. Mining machinery
Mine visibility is low. With remote control systems, greatly
increased the safety of operation, comfort and accuracy, saving
investment and improve efficiency.
5. Crawler slag loader
The use of industrial remote control device, without changing the
existing manual mode of operation to achieve the purpose of
unmanned to complete the slag operation. The Eliminating the harsh
environment, the unclear line of sight, the hidden dangers from
high temperature. Improve the efficiency of cleaning operations,
improve the working environment of metallurgical workers and reduce
the labor intensity of workers.