

Add to Cart
Motorcycle Helmet Resistance to penetration Tester With NELLM2015 AS NZS 2063
Application:
According to the production of helmet-related standards, mainly used to test the puncture resistance of various helmets such as motorcycle helmets, sports helmets, electric car helmets, firefighting helmets, rescue helmets, military and police helmets, pilot helmets. Widely used in a variety of helmets related to production, scientific research, quality supervision and testing units.
Feature:
1,Using special test tooling, it is convenient to change full-head type and half-head type for full-head or half-head testing.
2,The base has impact strength and can be firmly installed with relevant devices and reserved with relevant fixing holes.
3,Piercing steel cone with electric control suction and release.
4when the puncture cone contact with the head mold, the thorn alarm device automatically alarm prompt.
5,The impact height can be set by itself, and real-time display of the impact height, the set height to, automatically stop rising.
6,The piercing steel cone lifting and releasing part are used double guide structure, to ensure a smooth fall.
7,the head mold fixed base can be adjusted for the angle, easy to carry out different parts of the test.
8,puncture area configuration 180 ° rotatable high-strength protective cover.
9,different standards and helmet configuration is slightly different, the specific configuration to the actual purchase.
Catalog about Safety Helmet Testing Machine
Safety Helmet Testing Machine.pdf
Technical parameters:
Model | ZL-1814A |
Head moulds | Full head die with head weights of 4kg, 5kg and 6kg respectively. |
Piercing steel cone | Made of tool steel, mass 3kg, hardness ≥ 50 HRC, cylinder with cone end diameter 25mm,, cone tip radius 0.5mm, angle 60°, overall length > 40mm. |
Impact height | 0-1000mm/15000mm/3000mm, optional |
Applicable standards
ECE,EN,ASTM,JIS,SNELLM2015,AS/NZS 2063
GB811,GB24429,GJB1564A