Manual Electric ASTM D4318 Liquid Limit Machine Butterfly type for Soil Moisture Content

ASTM D4318 Manual Electric Soil Moisture Content Butterfly Liquid Limiter

Application:

The dish-type liquid limit meter is composed of a brass dish containing the sample, a hard high-quality rubber pedestal, an impact device cam wheel, a calculator, and a grooving knife to control the drop distance between the dish and the pedestal within 1 cm.

To determine the liquid limit of soil, to classify soil types, to calculate natural consistency and stagnant index, and to be used for design and construction.

Technical Specifications:

1. Electric motor drive/manual operation

2. Disk falling frequency: 120 hits/min (allowable error 15%)

3. Built-in strike timer

The method of using the dish liquid limit meter refers to ASTM D4318 "Standard Test Method for Liquid Limit of Soil"

Scope of application

1) This method is a test method for the determination of soil liquid limit. The obtained results need to be tested at least 3 times, and a plastic flow curve (FlowCurve).

Methods as below:

1 One-point method, calculate the liquid limit from a single test;

2 Inspection or identification test.

2) Unless it is stipulated that the soil to be tested is allowed to use the one-point method, the drop-dish method should generally be used. When the measured results are inconsistent or the soil tested is specified according to the technical requirements, the inspection test method or the identification test method should be used.

Definition

The liquid limit of soil is the boundary water content between the liquid state and the plastic state, expressed as a weight percentage of the dried soil. The water content of the limit is artificially set as: starting from the bottom of the dish, divide the plaster into two halves, the gap between the two halves is 1/2 inch (12.7 mm), and the dish containing the plaster is 1 cm (0.3937 inch) The water content when the two halves of the soil paste flow together when the height is dropped 25 times/2 seconds.

Equipment

1 Evaporating dish: Porcelain evaporating dish 4 1/2 inches (114.3 mm) in diameter

2 Soil Conditioning Knife: Soil Conditioning Knife or Blade 3" (76.2mm) Long and 3/4" (19cm) Wide

3 Liquid limit meter: a mechanical device composed of a copper plate and a bracket

4 Groovers: A groover with a gauge

5 Capacity: Appropriate container, such as a watch glass with a lid, to prevent loss of moisture during weighing

6 Balances: Balances with a sense of 0.01 grams

Sample

According to the ASTM method "Dry Preparation of Soil Samples for Determination of Particle Fraction and Soil Parameters", take about 100 grams of soil samples that have passed through a No. 40 sieve (425 microns) and have been thoroughly mixed.

We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located in Dongguan, Guangdong, China. It is a collection development, research, production and sales of test equipment technology company.

Companies with technical support, marketoriented, fundamental human. Have a high level of professionalism, experience and innovative research team and carved small peck production team. Companies with the most advanced technology, the most stable quality, best price, best after sales service, from installation and commissioning, professional training, to solve practical problems of customers, providing 24-hour technical advice. company's products among consumers enjoy higher status, with many agents to establish a long-term stable cooperative relations.

Our products are widely used in rubber and plastics industry, Paper/carton/paperboard industry, Cable and enamelled wire industry, Textile/Fabric industry, Shoes /Leather industry, Food industry and other many indstry. At the same time, are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB, ISO, TAPPI, EN, DIN, BS and other domestic and international standards.

Provide our customers with better overall solution laboratory, including laboratory design, planning, renovation and equipment selection, installation, training, maintenance, Comparative testing management system, such as one-stop authentication technology services.

Promises: Two year free maintenance of all equipment, maintenance of life, welcome to consult the discussion!