Petroleum Natural Gas Travl Pipe Bevel Cutter 153mm - 1829mm Processing Range
Brand Name:Bohyar
Certification:ISO 9001:2008, CU-TR, ISO14001:2004,OHSAS 18001:2007
Model Number:TC0672
Minimum Order Quantity:1set
Delivery Time:30 days
Place of Origin:Jiangsu China
Contact Now
Add to Cart
Active Member
Location:
Suzhou Jiangsu China
Address:
No. 28 Datong Road, Xuguan Town, Suzhou New District, P. R. China, Suzhou, Jiangsu, China
Supplier`s last login times:
within 32 hours
Product Details
Company Profile
Product Details
Petroleum Natural Gas Travl Pipe Bevel Cutter 153mm - 1829mm Processing Range
Travel Cutter
Product Introduction
Travel Cutter is secured to the pipe by a special tensioning/drive chain, driving itself around the pipe as it simultaneously cuts and bevels, providing a machined surface ready for welding. It's designed for cutting and beveling all common pipe materials, wall thicknesses and sizes from 6 inch- 72inch O.D (153-1829mm) and can be used in a wide range of applications, including natural gas, crude oil and radioactive environments.
Industry Application
It is widely used in long distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc.
Features
■ Perfect cold cutting
It has been used in a wide range of applications, including natural gas, crude oil and radioactive environments
■ Compact & portable design
Light weight, only 10"-12"gap, less than 10 minutes to install
■ A wide range of applications
Operate in the trenches full of silt and 25 meters underwater and available for cutting and beveling in flooded trenches and underwater mud at 600 feet.
■ Good stability
Strong corrosion resistance and durable structure
Technical Parameters
Tools
Model | TC0672 | Processing Range | 6"-72"(153mm-1829mm) |
Drive | Hydraulic | Wall Thickness | 5mm-25mm |
Hydraulic Requirements | 15 gpm @ 1500 psi. | Clearance | 254-305 mm (10"-12") radial, depending on pipe diameter. 20"axial(508 mm) |
Feed Method | Positive, non-slip chain drive. | Finish | Paint |
Cutter Speed | Adjustable 0-60RPM | Installation | Vertical or horizontal installation |
Operating Dimension | 610x510x280(mm) | Operating Weight | 100kg |
Hydraulic Control | Cutter on-off, feed on-off. Flow control valves which can adjust feed speed. Separate controls, providing adjustable feed and cutter speed. Forward/Reverse travel permits machine to be backed up. | ||
■ We have standard beveling tools of 30°, 37° and also can customize the tools.
Operating Instructions
■ After the pipe is cut half, insert the steel wedge into the slit of the cut pipe to prevent the pipe from clamping.
■ Sharp cutters will ensure safe, accurate, dependable cuts. Please carefully observe whether the cutting tool is sharp before cutting.
■ The cutting condition will be drier when cutting cast iron and ductile iron pipe. Usea thread cutting oil or a water soluble cutting oil on steel and stainless steel pipe to lubricate the cutters and help maintain sharpness.
■ Use specialized guide track when cutting in a vertical position or when exact accuracy is required.
■ Adjust the feed rate to reduce or eliminate cutter overload. Feed valve must be opened very slowly to achieve a slower feed rate. For complete control of feed speed, install throttle valve in the feed line.
■ The maximum effective cutting rate for the Travel Cutter on ductile iron is approximately one minute per inch of diameter. Some cast iron, steel, heavy wall pipe and beveling will require a slower feed rate.
Petroleum Natural Gas Travl Pipe Bevel Cutter 153mm - 1829mm Processing Range
Inquiry Cart
0