200Amp AC 3 Phase 50Hz Open Diesel Generator, Emergency Backup Generator
Brand Name:SHX
Certification:ISO9001:2015, CE, TUV, BV
Model Number:SCS990A
Minimum Order Quantity:1 Set
Delivery Time:20 working days
Payment Terms:100% L/C at Sight, T/T
Contact Now
Add to Cart
Active Member
Location:
Foshan Guangdong China
Address:
No. 1, Xinglong 2nd Road, Guanglong Industrial Zone, Chencun Town, Shunde, Foshan, China.
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
200Amp AC 3 Phase 50Hz Open Diesel Generator, Emergency Backup Generator
Genset Specifications:
| Genset model | SCS150 |
| Genset rated power | 110KW / 138KVA |
| Rated voltage | 400/230V (adjustable) |
| Rated current | 200Amps |
| Frequency | 50 Hz |
| Power factor | 0.8 Lagging |
| Connecting type | 3 phase 4 wire |
| Cooling system | Closed cycle water-cooled with fan, water tank |
| Overall dimension (L×W×H) mm | 4100×1800×2500 |
| Gross weight (kg) | 7500 |
| Diesel Engine | |
| Brand | CUMMINS (Optional ) |
| Model | 6BTAA5.9-G2 |
| Engine type | 4 cylinders in Line,4 stroke, direct injection |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Rotating speed | 1500 RPM |
| Engine cooling system | Water-cooled |
| Speed governing system | Electronic speed governor |
| Starting method | By 24V batteries |
| Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
| Displacement(L) | 5.9 |
| Bore×Stroke(mm) | 102×120 |
| Compression ratio | 17.5: 1 |
| 100% Load fuel consumption (l/h) | ≤208 |
| Lube capacity(L) | 16.4 |
| Alternator | |
| Brand | STAMFORD (Optional ) |
| Model | UCI274E |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP23 |
Control System
- Control, monitor and protect the Generator Set including:
- High water temperature
- Low oil pressure
- Over and under speed
- Over current
- Under/Over generator voltage
- Start and stop failure
- Low and high battery voltage
- Charge fail
- Emergency stop
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
200Amp AC 3 Phase 50Hz Open Diesel Generator, Emergency Backup Generator
Inquiry Cart
0