Synchronous Running Genset Control Panel 1000A For Power Generator Sets

Genset Control Panel 1000A For Two Or More Generator Sets Synchronous Running

SHX full auto synchronous control system has auto synchronization and auto parallel operation for each genset:

• When one genset is running on load, if the load is close to 80% of rated load (adjustable), send signal of genset adding automatically, standby genset starts up automatically, and parallel operation automatically after auto synchronization, distribute active load automatically and averagely, distribution difference is less than ±10%.
• When one genset is running on load, if the genset has fault, the system will disconnect the faulty genset automatically and send signal of genset adding automatically, standby genset starts up automatically, switch on and supply power.
• When two gensets are running, the total load less than 20% (adjustable), the system will send signal of genset decrease, standby genset unload and disconnect, shut down automatically after maintained running.

Operation:

1. Starting up one of gensets manually, switching on after running normally.

2. After that, starting up the second genset, put the switch to on position, at the moment the system detects automatically and control parameters of two gensets, including voltage, phase sequence, frequency and phase position, when it achieves condition of parallel operation, the system will bring in the second genset to parallel running automatically.

3. After parallel connection of two gensets, no matter how does the load change during running, the system will distribute active load and reactive load automatically according to the size of gensets, the distribution difference is less than +10%.

4. When gensets are in synchronous running, it can quit one genset through the order of “unload”, transit the load of this genset smoothly to another genset, and then switch off, shut down after time delay, which can avoid damage of genset due to load and unload suddenly.

GUANGDONG SUNKINGS ELECTRIC CO., LTD is one of the leading generator sets manufacture and supplier in southern China since 1993.

We make Diesel Generator Sets /Biogas Generator Sets covering 20KW to 2400KW (25KVA to 3000KVA), and offer fully power solutions for agricultural and industrial purpose. We are the appointed OEM partner of Cummins, Perkins, Volvo and Daewoo.Excellent engines equipped with world-known alternators such as Stamford, Marathon, Engga and Farada. All our jobs are to make sure the excellent performance of our generator sets.

Due to our credibility and strength in the passed 20 years, we were authorized by UN(United Nations) as Official UN Supplier on Marth 15th, 2007.

Our factory and office are located in Foshan City, a beautiful city near Guangzhou, which is only 45mins to Canton Fair Exhibition Centre by car.
We sincerely welcome friends from all over the world to our city and visit our company.
We would like to listen what you need for electric power, and offer you the best solution.