

Add to Cart
LIJIANG GLASS- FOR WORLD GLASS MACHINE USER SERVICE
Horizontal Glass Washing Machine with Soft Low e Brushes LJWBQJ2500
Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500
Maximum glass width | 2500mm (effective maximum: 2650mm) |
Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
Glass thickness | 3mm-25mm (digital display) |
Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
Main drive, brush speed regulation method | frequency control |
Table height | 900±25mm |
Total power | 42KW(water-bearing wind heating: 15KW) |
Water source | self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer) |
Power source | 380V 50Hz |
Dimensions (length × width × height) | approximately 6260*4800*3100mm |
Weight | 3940kg |
This cleaning machine adopts horizontal structure, which is used for cleaning and drying plate type glass;
-The main part consists of inlet, cleaning, drying, and out of film
-Conveyor adopts chain transmission
-The machine has 1 water tank. primary washing
-There are 4 groups of brushes and 3 groups of absorbent cotton
within the machine
-Reliable, good cleaning effect, easy to adjust;
-Conveying glass Frequency Control, easy to control, is more conducive to connect the bilateral edging production lines, glaze line, insulating glass production line, safety glass production lines
-special cleaning requirements or attached features can be customized
- the transmission adopts gear transmission, variable frequency speed regulation, digital display, easy to operate, it is conducive to connecting the production line
- the cleaning department and the wind cadres overall lifting, the highest lift is 400mm, easy to clean the internal rubber roller and maintenance
- by three to two on the hard brush brush cleaning, in front of the available cylinder lifting, cleaning all kinds of Low-e glass on soft brush with third.
- wind cadres use professional design of two pairs of wind knife, wind knife wind dry better effect!
►►►Stainless Steel parts showing
►►►The drying section is composed of 2 sets of high-pressure professional air knives.
►►►Glass washer installition in workshop
We could supply one section cleaning, two-section cleaning or multi-sections cleaning.