Product Details
Multi-functional Glass Cutting Table / Glass Cutter Machine on Sale
Brief Introduction
Multi-functional glass cutting machine is based on many years of
our company's working experience accumulation and technological
research and development, in the light of glass deep-processing of
safety, efficiency, personnel inputs, glass loading, glass storage
and difficulty of moving, we have successfully developed a
multi-functional glass cutting machine.
Main Functions
1. It makes glass move easily and solves the difficulties of glass
loading and unloading.
2. Using the wireless remote control system, it works more flexibly
and adapts to a variety of working conditions.
3. This machine improves working efficiency, saves human resources,
and makes glass processing more secure.
4. The main electrical use of imported parts, the equipment failure
rate is low.
5. Reducing the rate of glass breakage.
Multi-functional glass cutting machine is based on many years of
our company's working experience accumulation and technological
research and development, in the light of glass deep-processing of
safety, efficiency, personnel inputs, glass loading, glass storage
and difficulty of moving, we have successfully developed a
multi-functional glass cutting machine.
Technical Parameters
Item | multi-arms glass cutting table |
Power supply | 3P 380V/50Hz,7KW |
Total weight | 1100kg |
Production glass size | 3600x2400mm,3300x2400mm,2400x1830mm |
Dimension | 3600*2050*800mm |
Air-floated Breaking Table for Glass Cutting
It is mainly composed of four parts: frame mechanism, splitting
mechanism, pneumatic control system and electrical control system.
* Sheet size: Min size: 1500 *1200mm (Single Side loading) * Max
loading size: 2600 x 2000 mm * Glass sheet thickness: 3 ~ 19mm *
Working absorption depth: 700 mm * X-axis walking speed: 5-25m/min
(adjustable) * Y-axis walking speed: 8-12 m/min (adjustable) *
Conveying speed: 5-25m/min (adjustable) * Number of flip arms: 8
arms (double side loading) * Number of single arm suckers: three *
Loading type: Double side loading * Working cycle: 45S (15S for
each additional position) * Installation power supply: AC380V/50HZ
(special circumstances can be adjusted according to customer
requirements) * Installation total power: 5-10 kw * Compressed air:
0.6-0.8 Mpa; * Vacuum: -50-99 Kpa (adjustable according to glass
thickness) * Working table height: 900 + 20mm * Machine size: 4650
x 2980 x 900mm
Fully Automatic CNC Glass Cutting Machine
Its working principle is to convey the cut glass by conveying belt
to worktable, automatically input the position of glass through
photoelectric scanning system, and then the cutting head with a
diamond wheel on the cutter holder moves along X and Y directions
respectively by program control, cut the sheet. The CNC motion
controller is used in the control part of the machine, and an
advanced AC servo motor is used in the drive part. * Max size:
2600*2000mm * Thickness:3~19mm * Cutting accuracy:±15 * Cutting
accuracy of special-shaped glass:±20 * Cutting speed:0-200m/min *
Conveying speed:0-25m/min * Machine size:9600X2800X900±20mm *
Working table height:900mm±20mm * Weight:2600kg * Total power of
equipment:5-8kw
Fully Automatic Glass Loading Table
It is mainly used for automatic glass loading. After putting the
glass in the designated position and giving the signal of loading,
the big arm turns up about 95 degrees through the overturning
mechanism, and the whole machine starts to move forward. When the
induction device on the small arm touches the glass, the whole
machine stops walking and the glass is sucked by the suction cup
through the vacuum system on the glass, small arm lifting motor
lifts the glass upward and backward about 80 mm. The walking motor
retreats and the big arm falls down. When the big arm is in place,
the suction cup under the glass begins to blow. When the small arm
falls down, the glass falls on the conveyor wheel. Finally, the
glass is conveyed to the cutting table by the conveyor wheel. *
Breaking bar: 1+1 type * Table Size: 9600x2800x900mm * Glass
thickness:3-19mm * Power: 4kw * Table height: 900 + 20mm