

Add to Cart
Good Performance Frequency 100kw Generator Dummy Load Bank
Product Description
1.our load bank an accurately test output power and load capacity
with all kinds of generators.
2.System consists of testing/control and load bank, mainly includes
AC load bank, data capture system, auto load/unload control system,
heat dissipation device, assist control and PC software.
3.User can control load bank through local control panel, also
through software
Technical Parameters
Rating Voltage/Frequency | 400VAC/50Hz, 3 phase 4 wire, |
Rated Load Power | Resistive load: 100kW |
Installed Capacity | Resistive load: 100kW |
Load Step | 1,2,2,5,10,10,20,50kW, min step load: 1kW |
PF(Power Factor) | 1 |
Load Tolerance (each step) | ±5% |
Load Tolerance(overall) | ±3% |
Display Precision | 0.5 class |
Control Power | 220VAC/50Hz, single phase |
Wire Connection | Load power supply input——terminal block |
Insulation | F |
Duty Cycle | Continuous |
Casing Dimensions and Cooling | about 860*570*710mm (length*width*height) Forced air cooling,Horizontal inlet air,Horizontal outlet air |
Weight | About 120kgs/set |
Transportation | Hoisting, there are lifting lug in top of casing |
Casing Color | Grey(RAL7035) |
Ambient Temperature | -10℃~+50℃ |
Relative Humidity | ≤95% |
Altitude | ≤1500 meter |
Atmospheric Pressure | 86~106kPa |
Contactor | Schneider |
Fuse | DELIXI |
MCU | INFINEON |
Data processing software | Kaixiang(self-developed) |
Alloy Resistance | Kaixiang(self-developed) |
Product Advantage
1.Stable Running: with the latest generation control module as the
core, a sharp rise in system response speed and anti-interference
performance, avoid function failure in complex electrical
environment, and ensure system running stably and reliably.
2.New Load Bank Technology: using the international advanced AC
load bank technology, overcome the old water bank defects, such as
bear bumpy, unable to use when go to sea, realize Mooring Trial and
Sea Trail, and simulate the real working condition of generator
running.
Application
1.Manufacturers of small gas engines also use load banks to test
newly manufactured engines under various mechanical loads.
2.This is accomplished by connecting the engine to the load bank
via a device called a dynamometer.
3.engine performance is monitored and, if necessary, adjustments
are made to ensure the product performs within intended
specifications.