DI2023 2.0 to 10.0 bar 0 to 0.8 kg/min White Red Dry Ice Cleaner Machine For PCB Surface Cleaning 220 V 50HZ 250W

White Dry ice cleaner machine for PCB surface cleaning

The technical parameters
Items Technical performance index
120mm*120mm*250mm or 150mm*150mm*300mm
Handles Block Sizes
Approx. 9.1 kg
Hopper capacity
0 to 0.8 kg/min
Variable feed rate
2.0 to 10.0 bar
Blast pressure range
A 3.0 to 10.0 bar ir Supply pressure
range
(Weight) 52kg
56 cm x 36 cm x 52 cm
Size (L x W x H)
(Power) 220 V 50HZ 250W

Brief introduction of equipment
When the dry ice machine works, the dry ice moves forward axially under the push of the cylinder. The motor drives the cutter head to rotate through the hammer wheel and cuts the massive dry ice
layer by layer into the ice bin. The chopped dry ice falls above the ice through the ice bin. The motor
drives the ice shaft to rotate, and the dry ice is taken to a relatively closed space below, and then blown
out by high-pressure air. Dry ice forms various jet shapes under the constraint of nozzles. Spray to the
surface to be deburred to achieve the purpose of deburring. The jet shape and jet intensity are
determined by the shape of the surface to be deburred, the firmness of burrs, and other factors. According to the target burr, adjust the size of the gun, the shape of the gun nozzle, and the speed of
the motor. Adjusting the motor speed can adjust the ice cutting amount accordingly. Usually, the more
burrs are, the firmer they are, and the larger the motor speed is. The specific adjustment amount is
determined according to the actual situation. II. The working principle
The principle of dry ice deburring/cleaning is that dry ice particles are driven by compressed air and
impact the deburred surface at high speed. Dry ice crushes sublimates and absorbs heat in an instant. The thermal expansion coefficient of the burr is different from that of the matrix, which makes the
burr crack rapidly. Crushed dry ice particles enter the crack. Due to the vaporization of dry ice, its
volume expands nearly 800 times in an instant. In this way, a "micro bomb" is caused at the impact
point, and burrs are quickly peeled off to achieve the best cleaning.

Youtube link of this machine: https://youtu.be/2K85loXS6b0

---Before cleaning---After cleaning

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!