Stainless Steel JIS axis center Torque Sensor 4.5~5.5(VDC) For Power-assisted Bicycles 0.5~90(N·m) IP66

JIS axis center Torque Torque Sensor for Power-assisted Bicycles

WHY US

*Magnetic field zero interference

*Good stability and high accuracy

*Response speed

*Non contact, long lifespan

Product line sequence interface and output characteristics

The interface can be customized according to user needs

Features

Strong anti magnetic interference ability;

Measurement accuracy ≤ 1%;

Dynamic response time ≤ 20ms;

Work loss ≤ 0.2w, maintenance free, good interchangeability;

The installation has a large tolerance for axial spacing, which is better than similar power sensors;

Not sensitive to bending moment and axial force, with strong resistance to external force interference;

Non contact measurement has a long service life

High precision, good stability, and high consistency;

The assembly size and input/output signals can be adjusted;

After-Sales service

Provide a warranty period of up to 24 months,

Provide warranty to the maintenance department for non human caused malfunctions during equipment operation,

For component damage caused by non-human factors, the maintenance department will

Responsible for providing repair or replacement of damaged components.

Attention

During the disassembly process, please install and disassemble in order.

If the disassembly is not carried out in order, the damage will be borne by oneself.

Instructions

1.Lock the left end cover in the direction shown in the diagram (locking torque 35Nm)

2.Insert the torque sensor assembly from the right side of the five way connector, and thread the output wire through the hole below the five way connector (the center of the hole is located in the middle of the five way connector)

3.Install the right end cover and lock it in the direction shown in the diagram (locking torque 35Nm)

4.Install the large gear plate, and the splines on the large gear plate match the splines on the torque sensor.

5.Lock the nut in the direction shown in the diagram. (Locking torque 35Nm)

6.Install the crankshaft and complete the installation

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!