Add to Cart
15KV Cold Shrink Cable Joints Kits For Connection Outdoor Cable Jointing Kit
1. Introduction:
Chuangyin® Cold Shrink Joints are widely applicable for jointing
XLPE/EPR cables medium voltage up to 42 kV, which provides
flexibility, easy installation at low temperatures and superior e
le c tr ic a l perf or man c e ove r a w i d e ra n ge of op e ra
ti n g temperatures. The finished body is expanded and loaded onto
a removable supporting core, which allows the joint to be installed
without the need for tools or heat.
The splice body provides the essential stress relief, is designed
with geometric stress cone on both sides and Faraday Cage in the
middle so that stress cone and insulator always keep the active
pressure and steady long-term operation to cable. The splice
insulation effectively replaces and continues the performance
characteristics of the cable insulation across the entire splice.
Chuangyin®Cold Shrink Joints are injection moulded and consists of
three layers. A semi-conductive electrode, which forms a F a r a d
a y C a ge a r o u n d t h e c o n n e c t o r, a h ig h p e r m it
t i v i t y insulation layer, which both insulates and stress
controls, and an outer semi-conductive layer which ensures all
screens are at earth potential.
The joint is stepped to allow a greater application range for
XLPE/EPR cables. Cold Shrink Joints are available for single core
and three core cables.
Cable section: 25 to 630 mm2
Voltage Rating: 6/10 (12) kV, 6.35/11 (12) kV, 8.7/15 (17.5) kV,
12/20 (24) kV, 12.7/22 (24) kV, 18/20 (24) kV, 18/30 (36) kV,
20.8/36 (42) kV, 21/35 (40.5) kV, 26/35 (40.5) kV
2. Parameters:
Item | Parameter |
voltage | 15kV |
5min AC Voltage withstand | 39kV |
15min DC voltage withstand35 | kV |
Partial discharge | 15/20/45kV<10pC |
Lightning Impulse Voltage | 95kV |
Standard | IEC60502.4,GB/T12706.4 |
3. Packing:
Cold Shrink Termination Kit
Cleaning Paper
Insulation Tube
Silicone Grease
Sealing Tube
Phase Tape
Installation instruction
Cleaning paper
Ground wire
Constantforce Spring
Accessories
Glue For Sealing And Filling
5. Model Option:
Model | Cable section (mm2) | Core insulation OD (mm) | Code |
CYSU-15- (1) 3-25〜50 | 25 〜50 | 12.3 〜20.7 | 1# |
CYSU-15- (l) 3-70〜120 | 70 〜120 | 20.7 〜26.9 | 2# |
CYSU-15- (1) 3-150〜240 | 150〜240 | 26.5 〜32.7 | 3# |
CYSU-15- (1) 3-300〜400 | 300〜400 | 31.9 〜40.9 | 4# |
CYSU-20- (1) 3-25〜50 | 25 〜50 | 14.3 〜22.7 | 1# |
CYSU-20- (l) 3-70〜120 | 70 〜120 | 22.7 〜28.9 | 2# |
CYSU-20- (1) 3-150〜240 | 150〜240 | 28.5 〜34.7 | 3# |
CYSU-20- (1) 3-300〜400 | 300〜400 | 33.9 〜42.9 | 4# |
CYSU-35- (1) 3-50〜70 | 50 〜70 | 32.5 〜34 | 1# |
CYSU-35- (l) 3-95〜185 | 95 〜185 | 36.5 〜40 | 2# |
CYSU-35- (1) 3-240〜400 | 240〜400 | 40 〜47 | 3# |
CYSU-35- (1) 3-500〜630 | 500〜630 | 47 〜54 | 4# |