

Add to Cart
Dimmable LED Candle Light Bulb Lamp 3000K 4.3W 430LM K5 Crystal CE
RoHS
1. Description:
Ado LED Crystal Candle Light Bulb is using ultra-bright highest
level Epistar LED chips with proprietary encapsulation technology,
realizing excellent luminance, low brightness decline.
Constant-current driver is used to ensure the lamp working with
reliability and stability. Our unique design of led crystal candle
light obtained Utility Model Patent, there are several different
shapes, candle/globe/diamond/bulb, base can be E14 or E27, dimmable
is available. It is easy to install, can be widely used in
decorative lighting, accent lighting, closet lighting, ceiling
lighting, etc. It has EMC,CCC,RoHS,CE certiticates, approved for
the global markets. 30000 hours long lifespan with 2 years
warranty.
2. Advantages:
1. High effciency: 100LM/W, 2W could compare with 40W incandescent
lamp.
2. High color rendering: good color reproduction, clear vision, see
the object will not be distorted.
3. Easy to install, transit no broken
4. Energy-saving: Saving 80% power than traditional incandescent
lamp
5. High sensitivity, high bright and low consumption.
6. Soft lighting and no glare.
7. CE RoHS EMC LVD certificates with good quality
3. Specification:
4. Features:
Base | E12, E14 E26, E27, B22 |
CCT | 2700K, 4000K, 6000K |
Voltage | AC110-130V, AC220-240V |
Power | 3.3w, 4.3w |
CRI | 80Ra, 90Ra |
LED Driver | Dimmable or non-dimmable |
5. Trade Term:
Trade Term | EXW, FOB, CIF |
Sample Shipping | By DHL, UPS, FEDEX, TNT |
Bulk Order Shipping | By Air, By Sea |
Sample Delivery | 3-10 days |
Bulk Order Delivery | 15-25 days |
6. Installation manual:
1. Please cut off the main power and moving out the old lamp,
meanwhile, please ensure your hands are dry. And there must be a
person to watch out in case of any danger.
2. Please install our LED filament bulb, the socket must match
bulb's base. If the socket is E27, then make sure you are
installing E27 base bulbs, the wrong base and socket will cause
short circuit.
3. Please carefully check the installation again to make sure
everything is ok, then switch on. Finally bulb will show a nice
lighting performance.
7. Quality control:
100% of the lamps will be tested and keep lighting for 24 hours to
test its quality reliability , and we will also test it’s
temperature after 24 hours lighting.Then after it is cool we again
test 100% of the lamps to see if it still work well. If defective,
we will check the reasons and make sure not to happen again.