

Add to Cart
Differential Pressure Controller with SPDT Contact for Air Condition
SKDP88 differential pressure control is normally used in gas or liquid system to control the pressure difference between the gas/liquid pipeline and the circuit. A typical application is to install the controller in the bypass pipeline near the system pump. When the system pressure difference increases and exceeds pre-set pressure, the control valve will open and more liquid/gas goes through the side valve, which will reduce the pressure differential between these two pipes of the water system. On the opposite, the pressure differential will increase between these two pipes of the water system.
Performance
The set point can be determined quickly through the direct-reading scale.
The pressure difference setting can be changed without moving the cover.
Electrical parameter
Switch connection ratings: 5amp 125/250VAC 1/4 H.P., 125VAC Fine Silver Contacts.
Technical parameter (SKDP88B)
Adjustable range: 0.06MPa ~ 0.35MPa (factory set: 0.1Mpa).
Burst Pressure: 1.7Mpa
Temperature: ≤85℃
Repeatability: ≤1.5%
Setting accuracy: ≤5%
Life of switch: ≥ 50 thousands times
Max.△P: 0.2bar
Operating differential pressure: 0.02Mpa (fixed)
Type and specification: Unit: Mpa
Type | Range | MOP |
SKDP88S | 0.01~0.06 | 0.50 |
SKDP88A | 0.03~0.20 | 1.50 |
SKDP88B | 0.06~0.35 | 1.50 |
SKDP88D | 0.2~1.2 | 3.0 |
Dimension