ASTM G 155-04a Xenon Testing Machine , Xenon Arc Weatherometer Test
Chamber Temperature Control ANSI Z97.1-2009
Descriptions:
ASTM G 155-04a Xenon Arc Aging Test Chamber Suitable for plastics,
rubber, paints, coatings, inks, paper, medicines, food, cosmetics,
textiles, auto parts, packaging materials, construction materials,
electrical and electrical products, etc.; provide a corresponding
environment for scientific research, product development and
quality control Simulation and accelerated tests provide important
test basis.
Standards:
ASRM G155-2013, ANSI Z97.1-2009, ASTM D2565.
Performance Indicators:
Temperature range | RT+10℃~80℃ |
Humidity range | 50%±5% |
Rain time | 1~9999 minutes, adjustable |
Rain cycle | 1-240 minutes, adjustable interval (break) |
Spectral wavelength | 300nm~400nm |
Xenon lamp power | 8.5kw (life: 2600 hours, water cooling) |
Lamp | 600mm long, 2 pieces in total |
Radiation intensity | 0-60w/m² |
Power supply | AC380V±10% 50±0.5HZ |
Operating environment temperature | ±5℃~+30℃ ≤85%R·H |
Control operating system: PC can be connected via IP to
control/operate the test chamber system
Time controller: touch screen precise timing control
Accuracy range: setting accuracy: temperature ±0.1℃, humidity
±0.5%R·H; indicating accuracy: temperature ±0.1℃, humidity ±0.5%R·H
Temperature and humidity sensor: platinum resistance Pt100Ω/mv
Humidification system: external isolated all stainless steel
shallow surface evaporative humidifier
Blackboard temperature: bimetallic blackboard thermometer 55℃~75℃
Water supply system: humidification and water supply adopt
automatic control, xenon lamp cooling and circulating water
Temperature controller: imported microcomputer integrated
temperature and humidity controller
Humidity: 30%~65%RH when irradiated, up to 90%RH when dark
Circulation system: temperature-resistant and low-noise
air-conditioning motor, multi-blade centrifugal wind wheel
Outer box material: high-grade spray color steel plate/SUS304
stainless steel matte line hairline treatment
Inner box material: SUS304 high quality stainless steel light board
Sample rack material: SUS304 high quality stainless steel bar
Door frame heat insulation: high and low temperature aging
resistant silicone rubber door seal
Standard configuration: 1 set of anti-radiation glass window, 1
dynamic sample rack, 2 xenon lamp tubes
Safety protection: leakage, short circuit, over temperature, water
shortage, motor overheating, over current protection/controller
power failure memory
Water cooling system: 1 set, cooling system: 1 set
Xenon lamp power supply: 1 set
Number of test pieces: 6 pieces
The maximum thickness of the fixture is 100mm, and the thickness of
the six fixtures can be adjusted independently