

Add to Cart
ASTM D2565 Xenon-arc Exposure of Plastics Intended for Outdoor Applications Test Chamber ASTMG155-05a
Application:
It is suitable for plastic, rubber, paint, paint, ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, building materials, electrical and electrical products, etc.; it provides corresponding environmental simulation and accelerated test for scientific research, product development and quality control, and provides important test basis.
Standards:
- ASTM D2565
- ISO 4892.2
- ASTMG155-05a.
Performance index:
Temperature range | RT+10℃~80℃ |
Humidity range | 50%±5% |
Rainfall time | 1 ~ 9999 minutes, adjustable |
Rainfall cycle | 1-240 minutes, adjustable intervals |
Spectral wavelength | 300nm ~ 400nm |
Xenon lamp power | 6.5kw (life: 1800 hours, water-cooled) |
Radiation intensity | 0-60 w/ ㎡ |
Ambient temperature | ±5℃ ~ +30℃ ≤85%R•H |
Test time | 6000hr |
Power supply voltage | AC380V±10% 50± 0.5hz |
Service conditions:
-Temperature: 15 ℃ ~ 35 ℃
-Relative humidity: not more than 85% RH
-No strong vibration, no strong electromagnetic field
-No high concentration dust and corrosive substances
-No direct sunlight or other heat source
-There is no strong air flow around. When the ambient air needs
forced flow, the air flow should not directly blow to the box.
-The test chamber shall be placed stably and horizontally.
-There should be a certain distance around the test box to
facilitate maintenance and operation
-The installation site is well ventilated
-Good ground wire
Our products:
1. Fire Testing Equipment
2. Building Material Fire Tester
3. Wire and Cable Fire Tester
4. Environmental Test Chamber
5. Textile Testing Equipment
6. Plastic Testing Equipment
7. Tensile Testing Machine