250ZGB High Efficiency And High Flow Industrial Pump Centrifugal Slurry Pump

Main introduction:

The 250ZGB High Efficiency And High Flow Industrial Pump belongs to ZGB(P) series slurry pump. It is horizontal, single-stage, single-suction, cantilever, double-shell, centrifugal slurry pump. ZGB and ZGBP slurry pumps of the same diameter The overcurrent components are interchangeable and the external dimensions are the same.

The transmission part of 250ZGB High Efficiency And High Flow Industrial Pump adopts horizontal open type thin oil lubrication bracket, and has two sets of internal and external water cooling systems.

The design of ZGB High Efficiency And High Flow Industrial Pumps is mainly to meet the development of electric power, metallurgy, coal and other industries, and to the characteristics of ash removal and slurry transportation conditions.

Based on decades of experience in design and manufacture of slurry pumps, we have extensively absorbed advanced technology and research results from home and abroad, and developed a new generation of high-flow, high-lift, multi-stage series ZGB (P) series slurry pumps.

The 250ZGB High Efficiency And High Flow Industrial Pump has a wide performance range, good cavitation performance and high efficiency. Multi-stage series technology can be used to meet long-distance transportation. The flow-through components are available in a variety of metals and add depth. With a variety of speeds and a variety of variants, the pump operates under optimal industrial and mining conditions. Long service life and high operating efficiency can meet a variety of harsh conveying conditions.

Type meaning

250ZGB(P)

250-------------Discharge Diameter (mm)

Z----------------Slurry Pump

G----------------High Head

B---------------- Series Code

250ZGB Performance Chart

Main technical features

Using CAD design method, excellent hydraulic performance, high efficiency and low wear;

The flow path is wide, the anti-blocking performance is good, and the cavitation performance is superior;

The impeller and filler combination seal and mechanical seal are used to ensure no leakage of the slurry;

The reliability design ensures that the MTBF of the whole machine is greatly improved;

Lubricate the metric bearing with thin oil, rationally design the lubrication and cooling system to ensure that the bearing

runs at low temperature;

Multiple stages can be used in series within the permissible pressure range, which allows a maximum working pressure of 3.6 MPa.

ZGB slurry pump structure features

ZGB slurry pump, except for the pump head part (including front and rear pump casing, volute casing, front and rear guard plates, impeller, etc.), the rest of the structure is similar, using the same series of transmission parts, the pump head part, the shaft seal part And the transmission part, respectively, describes its structural characteristics.

1. ZGB slurry pump shaft seal part: shaft seal has three forms, auxiliary impeller shaft seal and packing shaft seal, mechanical seal.

(1) Mechanical seal: For the working condition that is not suitable for the above two shaft seals, mechanical seal is adopted to reduce the number of maintenance of the shaft seal part.

(2) Packing shaft seal: The packing shaft seal structure is simple, the maintenance is convenient, and the shaft seal water is needed. For the working condition which is not suitable for the shaft seal of the auxiliary impeller and the working condition for pumping, the packing shaft seal can be used.

(3) Sub-impeller shaft seal: Single-stage pump or multi-stage series third-stage pump when the positive pressure of the pump inlet is not more than 10% of the pump outlet pressure value, the auxiliary impeller shaft seal can be used, and the auxiliary impeller shaft seal has no Dilute the slurry, the sealing effect is good and so on.

2, ZGB slurry pump pump head part: ZGB series slurry pump is a double pump shell structure, namely the front pump casing, the rear pump casing and with a replaceable overcurrent part (including impeller, volute, front guard, Rearguard). The front and rear pump casings are made of gray cast iron or ductile iron according to the working pressure. They are vertically opened and bolted. The rear pump casing has a stop and bolts connected to the bracket. The discharge port of the slurry pump can be installed at eight angles. The front and rear covers of the impeller are equipped with back blades to reduce leakage and improve pump life and efficiency. The inlets of all types of pumps are horizontal, and the pump rotates clockwise as seen from the transmission direction.

3. Transmission part: ZGB slurry pump adopts the same series of transmissions, including bracket and bearing assembly. The pump shaft has large diameter, good rigidity, short cantilever, and will not bend and vibrate under severe working conditions. The bearing adopts single row cone. Roller bearing and deep groove ball bearing can be used to withstand the axial and radial load of the pump. The bearing is lubricated with thin oil. The bearing body has sealed end caps at both ends, which can effectively prevent the slurry and other dirt from entering the bearing. ZGB slurry The pump is provided with two hose joints in the bearing body, which can be connected with the water source to cool the bearing chamber, so it can work under high ambient temperature to ensure the safe operation of the bearing and has a high life.

Structural Drawing

Selection & Performance Chart

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.