20000L lpg transport trailer / LNG Tanker Vessel At SKD Type

Model NO.:LNG Vessel
Code & Material:SUS 304/06cr19ni10/Q345r
Design Pressure:1.61MPa
Transport Package:Bare Package
Specification:20000L
Trademark:GET ENERGY GET VEHICLES
Contact Now

Add to Cart

Verified Supplier
Location: Jinan Shandong China
Address: NO 8001 JINGSHI EAST ROAD,JINAN CHINA
Supplier`s last login times: within 28 hours
Product Details Company Profile
Product Details

20000L LNG Tanker Vessel at SKD type for Truck refitting for Liquid Natural Gas

Liquefied petroleum gas or liquid petroleum gas (LPG or LP gas), also referred to as simply propane or butane, are flammable mixtures of hydrocarbon gases used as fuel in heating appliances, cooking equipment, and vehicles.

As it burns release less CO2 per unit of energy than does coal or oil, but a higher calorific value (94 MJ/m3 equivalent to 26.1kWh/m3) than natural gas (methane) (38 MJ/m3 equivalent to 10.6 kWh/m3), so it become popular as a Clean energy in these years.

G.E.T Vehicles provides light weight and high-volume Medium-pressure Gas
(LPG) tank semi-trailer with 3 axles and more to customers. With 61900-liter max volume, 30,000 filling weight, European ADR standard and ASME STANDARD, it is an optimal transporter for ENERGY logistic industry.

Series of products: vehicles for transportation of LPG, propane, propylene, liquid ammonia, etc.
20000L LNG Tanker Vessel at SKD type for Truck refitting for Liquid Natural GasLNG Vessel
overall dimension of the vehicle(mm)Length7498
Width2490
Height (unload)
Overall dimension of outer shell(mm)Length7498
Dia Φ2204
Overall dimension of Inner vessel(mm)Length7049
Dia Φ1954
Volume m³51.55
Inner VesselOuter Jacket
Leakage Test Pressure Mpa0.7Helium Mass Spectrometer Leak Detector
Design Pressuer Mpa0.7-0.1
Desgin Temperature (ºC)-19650
working Pressure Mpa0.7-0.1
Test Pressure Mpa1.4950.1
Tanker Filling Ratio01
Joint Efficiency10.85
Inner Tanker MaterialSUS 304/06CR19NI10Q345R
Thickness of the Shell/Head mm8/106/8
vacuum Degree of Interspace Pa≤1x10^-1 Absolute Pressure
Static Evaporation %/d≤ 0.21(LN2)
Thermal Insulation typehigh-Vacuum Multi-layer insulation
Inner Tanker Mass12000
Liquid Location MeterTypeCYJ-I
ModelFloat Ball Type
Nominal Pressure4 MPA
Surverying Range0-1500mm
Safety ValveTypeDA22Y-40P
ModelInner Full lift
Nominal PressurePN2.5Mpa
Norminal DiameterDN25mm
Opening Pressure0.74 Mpa
capacity(L)20000
Storage Tank volume:20000 m3,LNG : 387.4kg/m3
Tank facility
Design pressure0.7MPa
(see technical proposals)
MAWP0.92MPa
(see technical proposals)
Capacity
Code & MaterialStainless Steel 304/ Q345R
vacuum Degress of Interspace Pa≤1*10^-1 Absolute Pressure
Static Evaporation %/D≤0.21 (LN2)
Thermal Insulation typeHigh-Vacuum Multi-Layer Insulation
Filling & Discharge SystemControl methodMechanical
Liquid dischargeSingle liquid discharge systemSide of the trailer
Valve boxSingle valve boxesSide of the trailer
ValesBrand
Emergency Valve (Liquid Phase)Rego
Emergency Valve(Gas Phase)Rego
PRVRego
Vent ValveRego
Liquid AdaptorRego
Gas AdaptorRego
Liquid Adapter CapRego
Gas Adapter CapRego
Pressure GaugeRego
Angle ValveFisher
ThermometerWIKA
Liquid Level GaugeRego
Ball valves (Liquid Phase)Modentic valve
Ball valves (Gas Phase)Modentic valve
Main Instruction

Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4, with some mixture of ethane C2H6) that has been converted to liquid form for ease and safety of non-pressurized storage or transport.The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). Because of LNG achieves a higher reduction in volume than compressed natural gas (CNG) so that the (volumetric) energy density of LNG is 2.4 times greater than that of CNG (at 250 bar) or 60 percent that of diesel fuel. This makes LNG cost efficient in marine transport over long distances and populared as an clean energy in these years.

G.E.T Vehicles provides light weight and high-volume Liquefied GAS Transportation (LNG) tank semi-trailer with 3 axles and more to customers. With 56000-liter max volume, 1.0 Mpa, Super vacuum multi-layer insulation are used for Support of inner tank and outer tank parts; European ADR standard and ASME STANDARD, it is an optimal transporter for ENERGY logistic industry.

Series of products: LNG cryogenic liquid Trailer, Cryogenic Industrial Gas Trailer, etc.
Thermal-insulating mode
:Super vacuum multi-layer insulation
Stability System
The stability system of GET Vehicles acts as real-time monitoring of driving conditions of the vehicle and intervenes automatically in situations where vehicle stability enters a critical area. Its brakes specific wheels in order to help the vehicle returning to safe driving conditions, preventing rollover or out of control.
Operation Monitoring System
Operation-monitoring system detects the whole process about tank loading, transportation and tank unloading. All the PRV Valve , Emergency valve ( liquid Phase and Gas Phase) ,vent valves, gas adaptor , Thermometer and the ball valves are mostly imported from America Fisher or Rego
Lift-up Axle System
Lift-up Axle System can increase driving distance and reduce costs of tires significantly. Test results indicate that the total distance of tires mounted on this system can be up to 750000 km, twice or more than traditional system.
Air Suspension
Comparing to traditional leaf spring suspension, air suspension can adjust the extent of soft or firm and the height of the vehicle, provide enhanced performance of shock-absorbing and driving safety.
China 20000L lpg transport trailer / LNG Tanker Vessel At SKD Type supplier

20000L lpg transport trailer / LNG Tanker Vessel At SKD Type

Inquiry Cart 0