Water Carrier Box Aluminum Sheet Circle , Kitchen Packing Aluminum Round Disc Aluminium Wafer

Aluminium Sheet Circle Aluminum wafer for aluminum pot, street lights, water carrier box

Our company produces all series of aluminum wafer, and customer can customized the aluminum wafer of

various diameters. The process technology can be divided into 2 types: cold and hot rolling, and the products

are widely used in deep drawing aluminum pot, aluminum pot, grate, street lights, cosmetics boxes and other

fields. Our factory is located in the important town of aluminum processing and peripheral aluminum ore

resources is rich, so the cost will be lower. It has advantages of good quality and low price.

Advantages

1. NC full automatic. The production line neither needs workers to contact any materiel during the production

of from the coil start to roll, until the entire volume of materials all completed blanking, nor needs any

adjustment, fundamentally completely eradicate the production safety hidden danger and product quality

problems of the ordinary punch punching.

2. The production line can use roll material directly to product aluminum wafer and do not need the slitting and

crosscutting processing of roll material, thus reduce production processes, production costs, and the

possibility of damage the surface of roll material, and the produced aluminum wafer can be ensured no oil and

no scratches.

3. The production line make full use of the width of the roll material, using high precision servo motor drive

control system and make the distance of wafer to the edge of material and the spacing of wafer is reduced to

minimum, fundamentally reduce the amount of waste material, so that the utilization rate of raw materials

reached more than 80%.

4. The production speed can reach 40-50 pieces per minute and improve the production efficiency.

5. Due to use the mould design of modular, when convert the production specifications of wafer, the

conversion time can be reduced to less than 15 minutes. The diameter range of the wafer can be produced is

85mm to 750mm.

6. Present uncoiling system, six type leveling machine, high rigid mechanical press, automatic palletizing

system and so on, to ensure the high quality of wafer products.

Production method:

punch processing

1. blank material cutting (cut into square)

2. blanking (blanking into the wafer you want). If it is roll material, then add an open book in front. The main

equipment of automatic wafer blanking production line processing and

aluminum wafer blanking production line: feeding trolley, uncoiler, leveler, feeding machine, swing unit, special

closed single point mechanical press, quick die change device, stacking unit, scrap shear, hydraulic system

and electric control system etc..

Luoyang Tailian New Materials Co., Ltd.

More than 60000 square meters ground area with initial investment 0.28 billion RMB (up to 0.8 billion as planned), Luoyang Tailian New Materials Co., Ltd. is established in 2016 and located in Weiliu Road, East Industry Cluster of Yichuan County, Luoyang City, Henan Province, specializing in manufacturing of commercial standard aluminium coil, aluminium sheet and further downstream aluminium foil for electrolytic capacitor (etched foil and formed foil), aluminium foil tape, honeycomb aluminium foil, decoration foil and aluminium PS plate.

Currently our plant consists of two aluminium foil production lines of φ280*φ850*2000mm, a cold-rolling production line (1850mm width), four 60-ton vacuum annealing furnaces, two 60-ton energy saving annealing furnaces, two vertical slitting machines, three horizontal slitting machines (1650mm width), ten etched foil and formed foil production lines, two production lines of coated foil for super electrolytic capacitor, standard laboratory and other supporting facilities.

We are equipped with advanced equipment, complete facilities, experienced managing, researching and developing team. We have got multiple national patents for cathode aluminium foil production. Our products are widely accepted by customers in the market, as good as Japanese and South Korean products.

In present marketing situation we will keep dedicated to product quality and marketing ethics to develop along with our customers and do the best to bring our products and service to a leading level in the industry.