Electric System CNC Pipe Bending Machine 5kw For Diesel Engine Processing

Non standard designing cnc pipe bending machine applying to diesel engine processing

--Operating system instruction

1. Turn on the power to enter the boot interface. The boot interface mainly displays the company's relevant information (including the machine model, manufacturer, manufacturer site
Site and its contact information, system date and time, etc.). The user can log in to operate the system.
2. Manual mode interface
2.1. Control the start and stop of the oil pump.
2.2.After the oil pump is started, press the corresponding button to manually control the main clamp, guide clamp, mandrel, auxiliary pusher, material rack, catch mode, bend axis action. In order to enter the core, it is necessary to return the main clip, guide clip, and bent arm to the original point.
2.3. In the interface can be switched to automatic mode, parameter settings, fittings programming, I / O mode or return to the home page.
2.4. Manually rotate forward and reverse the corner shaft. Such as "corner jog" tick, forward or reverse button press and hold. To do so, release the corner of the button and stop. Corner angle and speed can be set individually.
2.5. Manually advance, retreat and return the feeding axis. If "Feeding Jog" ticks, forward or back button
When you press and hold, the button stops and the cart stops. Feed length and speed can be set individually.
2.6. In this interface, you can switch to single-bend mode, automatic mode, file management, I/O mode, or return to the homepage.

3. Single bending mode interface. The single-bend mode allows the equipment to automatically perform single-bend mass production of pipes, after the parts of the equipment have been manually adjusted (including molds and parameters).
3.1. File name: The name of the processed workpiece number, which can be set in Chinese, English or numbers.
3.2. Setting value: Angle set by C elbow.
3.3. Present value: Current angle of C bend.
3.4. The preset output sets the number of pipes to be processed; the current output shows the number of completed pipes; it helps the user to master the production schedule. Press Zero to zero the current yield.
3.5. Before the automatic operation, you must first press the "Start" button, then follow the text prompts at the bottom of the interface to start the foot switch and start production. If you need to pause during automatic operation, you can press the “pause” button or pause the foot switch, and then press “pause” or pause to stop the pedal switch to continue running.
3.6. In this interface you can switch to manual mode, automatic mode, file management, I/O mode, or back to home page (open machine interface).

-- Machine characteristics

1. XYZ coordinate can be automatically changed into YBC process value.

2. Documents is protected by key to prevent it from being amended by random.

3. Electric system is matched with heat exchanger for automatic cooling. You can also select numerical control air conditioner to maintain the use life of electric system.

4. It is equipped with automatic adding oil system to decrease friction between bending tubes, prolong use life of mandrel and guarantee the quality of bending tubes.

5. The positions of material entrance, safety, input mold interfere and conduct mold interfere of material feed trolley can be set by hand and automatically memorized to cancel man measurement error and loss of machine collision.

-- Applicable industry

Recommended application industry: automobile fittings, oil pipe for brake, muffler, seats, motorcycle fittings, healthy equipment, air-conditioning, bicycle, steel furniture, sanitary wares and so on.

Automobile, locomotive, motorcycle, ship, ship, petrochemical, electric power, natural gas, nuclear industry, boiler, vehicle, fitness equipment, sports goods and other fittings.

-- Specifications of machine

-- Company service

1. Payment terms: 30% T/T down payment and 70% T/T before shipment.

2. Delivery time: No later than 15 days since receiving the advance payment.

3. Validity of the price: For ONE month.

4. Package: Wooden case.

5. Warranty period: We guarantee machine quality for 12 months. During this period, if spare parts of the machine were damaged, we can send the component to the customer by international express service freely.

-- Pictures of machine

►Zhangjiagang Huipu Machinery Manufacturing Co., Ltd established in 2002, is one of the professional manufacturers in pipe bending machines in Jiangsu province, China. Our company occupies a total area of 2000 sqms, and has a group of technicians.

►We are specializing in research, development and manufacturing of NC, CNC pipe bending machines, metal tube cutting machines, pipe end forming machines and other kinds of pipe processing machineries and equipments.

►Our company meets the requirements of furnitures, sports equipments, auto parts and other industries offering machines and processing tube products as well. We also design and manufacture machines of special specification according to customer requirements, as well as various kinds of non-standard machineries and equipments.

►Our company sincerely provides better services for new and original customers by virtue of advanced technologies, excellent quality control and competitive prices.