PLC Control Automatic Tube Bending Machine , High Performance Tube Bending Equipment

Accurate plc controller for automatic tube bending machine applying to medichair processing

-- Machine details

1. All the process documents are input by touch control screen.

2. Each bending tube can set compensation value, speed and gap between stripping according to the variety of different materials.

3. Every bending of the tube can separately compile 5 move orders, 10 speed matched for operators' use. It will improve working efficiency and decrease interfere points of tube pieces.

4. Touch control screen can transform between Chinese and English. Display of other languages can be ordered according to your demands.

5. Material feeding way can be selected in straight or clamp feeding according to different needs.

6. XYZ coordinate can be automatically changed into YBC process value.

7. Documents is protected by key to prevent it from being amended by random.

8. Electric system is matched with heat exchanger for automatic cooling. You can also select numerical control air conditioner to maintain the use life of electric system.

9. It is equipped with automatic adding oil system to decrease friction between bending tubes, prolong use life of mandrel and guarantee the quality of bending tubes.

10. The positions of material entrance, safety, input mold interfere and conduct mold interfere of material feed trolley can be set by hand and automatically memorized to cancel man measurement error and loss of machine collision.

-- Installation points

1. The ground of this machine needs to be leveled. After it is placed, it should be adjusted to the body without shaking. The principle of not oscillating when moving, it is best to use expansion bolts to fix on the ground.
2. Before connecting to the power supply, make sure the voltage of the customer's power supply is consistent with the machine.
10%, regulators should be installed, the power supply must have a perfect grounding.
3. When the power is turned on, first check whether the direction of the oil pump motor is the same as the direction of the indication. After pressing the “Oil Pump Start” button, confirm whether the system pressure gauge reaches 70Kg/cm2 immediately after the oil pressure starts (normal working pressure range should be ≤ 12MPa). If the oil pump is running and the system has no pressure, it means that the motor runs in reverse. Please adjust any two wires in the three-phase power cable.
4. After the oil pump is started, before the return of the original point, the main clips, guide clips and auxiliary push buttons on the operation panel can all be operated. In this case, please remove the debris and obstacles on the machine and press the "Home Return Start" button. At this point, the screen displays the screen during the 3-axis zero point return operation. When completed, it automatically jumps to the operation mode selection item page.

-- Main application

Adapted material: steel pipe, stainless steel, copper pipe, aluminum pipe;

Recommended application industry: automobile fittings, oil pipe for brake, muffler, seats, motorcycle fittings, healthy equipment, air-conditioning, bicycle, steel furniture, sanitary wares and so on.

CNC pipe bending machine is the bending processing equipment for the application of aerospace, automobile, locomotive, motorcycle, ship, ship, petrochemical, electric power, natural gas, nuclear industry, boiler, vehicle, fitness equipment, sports goods and other fittings.

-- Specifications of machine

-- Packaging and service

1. Payment terms: 30% T/T down payment and 70% T/T before shipment.

2. Delivery time: No later than 15 days since receiving the advance payment.

3. Validity of the price: For ONE month.

4. Package: Wooden case.

5. Warranty period: We guarantee machine quality for 12 months. During this period, if spare parts of the machine were damaged, we can send the component to the customer by international express service freely.

-- Pictures of machine

►Zhangjiagang Huipu Machinery Manufacturing Co., Ltd established in 2002, is one of the professional manufacturers in pipe bending machines in Jiangsu province, China. Our company occupies a total area of 2000 sqms, and has a group of technicians.

►We are specializing in research, development and manufacturing of NC, CNC pipe bending machines, metal tube cutting machines, pipe end forming machines and other kinds of pipe processing machineries and equipments.

►Our company meets the requirements of furnitures, sports equipments, auto parts and other industries offering machines and processing tube products as well. We also design and manufacture machines of special specification according to customer requirements, as well as various kinds of non-standard machineries and equipments.

►Our company sincerely provides better services for new and original customers by virtue of advanced technologies, excellent quality control and competitive prices.