

Add to Cart
Taxi LED Display P2.5 Wireless 4G Car Electronic Screen GPS
Positioning Advertising Screen
Features
1. Advanced and reasonable system design, high cost performance,
stable display effect, easy installation and maintenance.
2. Display mode, left and right movement, up and down movement,
left curtain, right curtain, middle opening and closing, flashing,
immediate display and other modes.
3. Use the program editing and playback software to edit, add,
delete and modify text, graphics, images and other information
through, mouse. The content of the arrangement is stored in the
control card, and the information playback is automatically
displayed in a loop according to the program table.
4. All-weather work, fully adapt to various environments, high
brightness, lightning protection, seismic integrity, cost-effective
5. Luminous brightness: in the visible distance, when the sunlight
directly hits the surface of the screen, the display content is
still clearly visible
Advantages
1. Wider network coverage
Taxi Top LED screen provides more comprehensive coverage for
widening the network. Since it is mobile (mounted in a vehicle), it
can help you reach a larger audience. If your main goal is to
maintain greater brand sensitivity or better profits, this suits
your needs.
Moving from place to place can reach all types of customers, even
in areas without static LED screens. In addition, you can set up
various types of content and have them play at the same time or in
different ways for each taxi.
2. Easy advertising
With this device, advertising becomes easy. No need for paper ads,
or if you're worried about reaching a sufficient audience due to
the static LED screen, it's just the device you need. Since the
taxi carries passengers and arrives at different locations, it will
move from time to time.
3. Travel more friendly
LED panels on the top of taxis give a friendlier atmosphere,
leading to better profits for taxi operators and drivers. Thanks to
the digital devices installed on the top, passengers are more
likely to be attracted to the ride than taxis with solid colors and
no LED screens.
4.Long service life
The LED screen on the top of the taxi has FRIM components and was
properly tested in our factory. It undergoes various inspections
and aging tests to ensure its rigidity and long service life.
5. Weatherproof
The LED device on the top of the taxi is installed on the top of
the taxi, so it will encounter different weather outside. To keep
its systems running well, it has a higher IP rating of 65.
Therefore, it protects against solids and liquids as well as
various weather areas.
Application
1. Car rear window LED display
Used for taxi, bus, engineering vehicle rear window display, mainly
text content.
2. Roof LED lights
More used in the taxi top, not only play the role of taxi light
box, but also display advertising. Get mobile media all over town.
It is used to display text information. There are GSM,GPRS,GPS and
other car screens;
3. The body full color LED display
Mostly used in advertising, public welfare publicity, performances,
etc., mainly play videos, pictures and other information. Generally
modified in the big car, according to the different needs of
customers and tailored to the lifting of the car LED display.
4. Official special, highway administration, patrol, administrative
law enforcement car screen
Not only equipped with explosion-flashing lights, but also display
information, information content change at any time;
5. Bus LED display
Bus good image has played an important role, you can get timely
news, weather forecast advertising and other information through
wireless means, and can synchronously display comprehensive
information such as station information
Parameters
Brightness | nits | 6000 | ||
Color temperature | deg.k | 3200 ~ 9300 | ||
Viewing angle - Horizontal | deg. | 160(+80/-80) | ||
Viewing angle - Vertical | deg. | 160(+80/-80) | ||
Cabinet weight | kg | 17 | ||
Display width | mm | 768 | ||
Display height | mm | 256 | ||
Cabinet depth | mm | 160 | ||
Cabinet area | sq. m. | 0.20 | ||
Cabinet material | Cold Steel | |||
Aspect ratio | 3:1 | |||
Ingress protection (Front/Rear) | IP | IP65/IP54 | ||
Operating temperature range | deg. C | - 20 to 50 | ||
Operating humidity range | HR | 10% to 90% | ||
Pixel type and configuration | R/G/B | SMD 3in1 | ||
Pixel pitch | mm | 4 | ||
Pixel matrix per cabinet | 192x64 | |||
Pixels per cabinet | 12288 | |||
Lines per meter | 250 | |||
Pixels per sq. meter | 62500 | |||
LEDs per sq. meter | 62500 | |||
Recommended minimum viewing distance | m | 4 | ||
Colours | 281trillion | |||
Gray scale | Levels | 65536 levels per colour | ||
Brightness control | Levels | 100 | ||
Digital processing | bit | 16 | ||
Frame rate | Hertz | 60 | ||
Display refresh rate | Hertz | 1920 | ||
Input voltage | VAC | 110/240 | ||
Input power frequency | Hertz | 50/60 | ||
Input power (max/avg) | Watts per sq.m | 400/140 | ||
MTBF | Hours | ≥10000 | ||
Lifetime (50%Brightness) | Hours | ≥100000 | ||
Module brightness uniformity | <5% | |||
Blind spot rate | <0.0001 | |||
Earth leakage current | mA | <2 | ||
Red wavelength | nm | 623 | ||
Green wavelength | nm | 525 | ||
Blue wavelength | nm | 470 | ||
Panel input format (with video processor) | VGA,DVI,SDI,YPbPr(HDTV),Composite,S-Video,TV | |||
Data interconnection | CAT6 cable/Fiber | |||
Operating system | Windows(XP/Vista/7/8/10) | |||
Control distance | Up to 180 meters by CAT6 cable, single fiber up to 15 kilometers. |