

Add to Cart
Full Color P10 Outdoor Led Screen 960x960mm Cabinet Stadium Led
Display
1. led screen pixel pitch, if you dont know how to choose, contact
us
2. led screen size:length ___m; width___m,or cabinet quantity;
3. use for indoor or outdoor;
4. use for fixed installation or rental?
5. soft flexible module led screen need structure draft;
6. intallation place pictures will be better
1.Energy-saving Design : Power consumption is lower than DIP
outdoor products, each LED electric current is below 15mA, lifespan
is longer, outdoor led advertising screen can reduce 25-50% of the
power consumption effectively, low-carbon environmental protection,
save electricity for customers .
2. Wide Viewing Angle : LED SMD encapsulation technology, makes
surface more smooth, the outdoor full color LED Display can reach
140 degrees viewing angle both in the horizontal and the vertical
direction, this has special advantages in some place, such as wall
LED Display, requires a wide viewing angle to show better
advertising effect.
3. Nice Color Blending : color uniformity is good, outdoor SMD
3-in-i design technology makes all the red, green, and blue chip in
one structure, distance is close, so it ensures the coherence of
brightness at optional angle is very good, achieve vivid viewing
effect, at the same time, the mask is dealt with special
processing, can ensure the coherence of product's brightness
further.
4. High Definition : High contrast, due to 3-IN-1 design structure,
full-color SMD3535 lamp bead size is small, so the light emitting
area is small, the black area is large, enhances the contrast of
LED Screen, the 1/2 scan mode high refresh rate, the gray level
> 16384, the refresh rate > 1200 Hz,makes the outdoor
full-color LED Display is clear enough to replace the traditional
DIP LED Display.
5. Good Heat Dissipation: using six Angle SMD3535 lamp bead, the
heat of lamp and IC can be dispersed by PCB board more effectively,
improve the heat dissipation performance of LED display module
significantly.
6. High Automation Production Efficiency: SMD LED can be processed
by automatic SMT mounter, improving production efficiency, reducing
defective product rate.
7. Light Cabinet Weight : Outdoor SMD 3-IN-1 LED uses waterproof
glue filling process, because of low lamp foot, don't need too much
glue to cover the lamp foot like the DIP, the surface is nice and
not deformed easily, assembling is convenient and neat.
P10 SMD full color led display mdoule | |
Pixel pitch | 10mm |
module pixel resolution | 32X16 |
module size | 320X160mm |
Scan mode | 1/2 or 1/4 scan |
Brightenss | 6500-7500cd/sqm |
Driving IC | MBI 5124 | Led Lamp | Epistar |
Led encapsulation | kinglight or nationstar | Led lamp size | SMD 3535 white |
Aver.Power | 290W/sqm | Display color | RGB full color |
Operating system | Android or windows | Best viewing distance | 15M |
Full Color P10 Outdoor Led Screen 960x960mm Cabinet information | |||
cabient material | Magnesium alloy | cabinet size | 960 * 960 mm |
Cabinet weight | 13.9kg | support module type | P5, P6.67, P8, P10, P13.33 |
required module size | 320X160mm | cabient body color | Black,gold,silver |
Door color | Black,gold,silver,blue,orange | Installation | Lifting; fixed installation |
waterproof | indoor IP30; outdoor IP65 | Accessories | lock,handle,connecting piece card fixed plate,power fixed plate |
Led Power Supply: Meanwell--LRS-350-5
Novastar control system: MRV 330Q receiving card.
Our Services
1. Warranty
(1) We provide warranty of all components for 24 months. During
this time, we will replace or repair our goods for free if there is
something wrong with them.
(2) We will provide maintenance for a lifetime and charge for the
raw materials only.
2. Technology Training
(1) We provide the technology training for free, which contains the
operation training and maintenance training in the factory.
(2) We will send our engineers to your country by negotiation.
3. Maintenance and Consultation
(1) We provide full maintenance for a lifetime and charge for the
raw materials only.
(2) We also provide lifetime consultation by E-mail, call, MSN or
other ways for free.
4. Documents and Certification
(1) We provide the operation manual, software, test report and so
on.
(2) We can also provide all kinds of certification such as CE, RoHS
and so on.
5. CAD Drawing and Fixing
(1) We provide CAD drawing on how to fix up the display for free
and some other expert suggestion.
(2) We will send our engineers to your place if we are expected
after our negotiation.
6. Additional Service
We provide you the forwarding information, and some other
information such as flight case, structure information for your
reference for free.
FAQ:
1.Are you the manufacturer or trading company? And where is your
factory?
We are professional manufacturer of Led outdoor, Led indoor display, rental display,
stadium screen, stage screen and advertising screen.
Our company is located in Shanghai China, which enjoys the transportation and good
reputation among our domestic and overseas customers for more than 5 years.
2.What kind of package can you choose?
Wooden case or airflight case,And if you choose airfligh case,there will be extra charge.
3.What is LED?
LED is the abbreviation leds (LIGHT EMITTING DIODE), it's emit visible wave lengths led
in the LED display industry
4.What is a pixel and pixel pitch?
The pixel is the smallest unit of lightemitting,consists of red,green and blue colors.The
same as ordinary computer monitors.
Pixel pitch refers to the center of the distance between two adjacent pixels.
5.What is the LED display module?
The base unit determined by circuit and installation structure,has the display function,
can simple assembling.
6.What is 3 in 1? What is its advantages and disadvantages?
The RGB color of LED chips encapsulation SMT light vertical tied together according
to certain spacing.
The advantages are: simple production, display effect is good.
The disadvantage is spectral color separation difficult, high cost.