WTY - S15KN Grade Compression Testing Machine 160 Samples Iorn Ore Pellet ISO4700 225kg

1. Model: WTY-S15

2. Product name: electronic compression testing machine

3. Introduction and application of testing machine

The machine is mainly used to test the properties of iron ore by the application of a compressive load to a single iron ore pellet at a specified speed of the compressive platen until the pellet is broken.

4. Definition

Crushing strength: the applied maximum compressive load at which an iron ore pellet is broken completely, and which is expressed as the mean value of all measurements of test sample.

5. Taking of sample

The test sample (test pieces) for determining the crushing strength shall by obtained at random, for example by the use of a random selection plate, on about 1kg of the sample for physical testing. The test sample shall be oven dried at 105±5℃ and cooled to room temperature before testing.

6. Number of test pieces (iron ore pellets)

Sixty or more test pieces, or as agreed upon between the interested parties, shall be tested for each sample.

7. Test procedure

Place a test piece (single pellet) at the approximate centre of the surface-hardened portion of the lower platen. Apply the load at a constant rate between 10 and 20mm/min throughout the test period.

Record the maximum load, at which the test piece undergoes complete breakage, to at least one decimal place, in decanewtons.

Note: complete breakage is ensured by continuing to apply the load until the platen gap has closed to 50% of the average test piece size.

Clean the platens thoroughly before the next test piece(single pellet) is tested.

Repeat the procedure on the remaining test pieces.

8. Main technical parameters of testing machine

Features and Function:

1. This testing machine adopt AC servo system drive the AC servo motor,by precision reduction gears drives the ball screw,with high test accuracy,low noise.

2. Without pressure oil leakage and proportional valve blocking, low noise, more reliable.

3. Window control and dealing software, design more reasonable.

can arbitrarily set pressure value, pressure time, auto calculate test result.

4. Advanced auto control function, can do single or batch test.

5. Auto stop,after sample broken.

6. With over load protection.

Jinan Wangtebei Instrument and Equipment Co., Ltd. is located in Jinan, Quancheng. It is a modern high-tech company specializing in R&D and manufacturing of metal, non-metal and composite mechanical testing equipment. Our company has established a good reputation among our users with our strong financial strength, high-quality professional talents, highly informatized industrial operation and high-quality and efficient services.

Our company currently produces a variety of testing machines, including electronic universal testing machine, hydraulic universal testing machine, pressure/compressive testing machine, non-destructive testing equipment, rubber testing equipment, steel strand testing machine, manhole cover testing machine, cupping test machine, steel bending Test machine and various testing machine parts and other products, widely used in aerospace, defense military, machinery manufacturing, vehicle and ship, steel metallurgy, wire and cable, plastic rubber, building materials, colleges and universities, research institutes, commodity inspection quality inspection.