Add to Cart
LCD 3 Phase Voltage Monitoring Relay , JVR1000 Time Delay Undervoltage Relay
The three-phase power supply monitor is a device that provides
relay protection for the three-phase motor input power supply
voltage is too high, voltage is too low, phase failure, reverse
phase, three-phase voltage imbalance. The protector can timely
break the contacts of the switch electrical appliances, disconnect
the three-phase power supply of the motor, and quickly and reliably
protect the motor.
1 . Reverse phase: The phase sequence of the power input to the
protected device is incorrect.
2 . Overvoltage: The operating voltage of the protected equipment
is higher than the set value.
3 . Undervoltage: The operating voltage of the protected equipment
is lower than the set value.
4 . Static phase loss: refers to the phase failure of any phase
when the protected device is in the non-operating state.
5 . Dynamic phase loss: refers to the phase failure of any phase
when the protected device is in the running state.
6 . Three-phase voltage imbalance: refers to a kind of voltage
imbalance protection that affects the safe operation of the
equipment due to the unbalance of the three-phase voltage.
1. Its protection function is not affected by the size of the line
or load current, inrush current, unbalanced current, and load
properties.
2. Ability to perform full-performance, climate-wide long-term work
to ensure normal and stable operation of appliances and motors.
3. There is no requirement for motor wiring when used for motor
protection.
♦ Features
-- Built-in LCD and keypad afford a precise,digital setting
-- Three-phase monitoring of phase sequence, phase loss, over- and undervoltage and phase unbalance
-- Adjustable over- and undervoltage, phase unbalance threshold
-- Independent adjustable delay time for overvoltage, undervoltage, phase unbalance
-- Powered by the measuring circuit
-- 1 NO & 1NC contacts
-- Faulure recording
♦ Protective Functions
-- Phase sequence
-- Phase loss
-- Phase unbalance
-- Overvoltage
-- Undervoltage
♦ Typical Applications
• Pumps • Fans
• Blowers • Motors
• Compressors
♦ Approvals
• CE • CCC
♦ Technical data
Type | JVR1000 |
Measuring circuit | L1,L2,L3 |
Rated voltage | 380VAC,50Hz |
Monitoring functions | Phase sequence,phase loss,overvoltage undervoltage,phase unbalance |
Overvoltage setting range | 390-490V adjustable |
Undervoltage setting range | 300-470V adjustable |
Hysteresis | 10V |
Delay time for overvoltage and undervoltage | 0.1-25s adjustable |
Phase unbalance setting range | 5%-29% adjustable |
Delay time for phase loss | 1s |
Delay time for phase sequence | Instant |
Indicators | LCD indicating voltage,current,operation status |
Output contacts | 1NO,1NC |
contact capacity | 6A,250VAC |
Dimensions(H x W x D) | 80*40*54mm |
Mounting | DIN rail |