Add to Cart
DC 6 Channel PLC Transistor Module DIN RAIL Mounting 1NO Output Contacts
Advantage of use PLC amplifier board
The PLC amplifier board protects the PLC output point or protects
the PLC input point. It also saves space in the cabinet. There are
10 advantages to the PLC wiring option PLC amplification board.
1. The output current of the general PLC relay is 2A. If the output
of the transistor is only 0.5A, it is very easy to create a PLC
burnout output point with the load. Use the PLC amplifier board to
convert the contacts into 5A, 10A. The contact life of the PLC can
be increased.
2. PLC amplification board can play the role of interference
spread, because the input and output of the PLC amplifier board is
opto-isolated, and will not burn out the PLC because the load is
impacted by high voltage.
3. PLC amplifier board is more intuitive, input and output wiring,
there are lights, easy to check the line fault and operating
conditions.
4. The PLC amplifier board saves space and only occupies 1/2 of the
conventional relay, occupying only 1/3 of the conventional solid
state relay.
5. Convenient wiring, input and output identification intuitive,
clear, there are common points and independent type, if the load
voltage is the same, you can use the common point type, that is,
provincial line connection, and wiring can greatly shorten the
time.
6 floor installation time, rail-mounted, integrated design, from 2
to 32 have, take the 32 way, stuck in the guide rail is a 32-bit,
with intermediate relay, then the card 32 Cards greatly increase
the speed of installation.
7. PLC amplifier board maintenance is easy to replace, the terminal
is plug-in type, no stitches.
8. The PLC amplification board has a protection circuit and comes
with insurance. It is not easy to damage the PLC amplification
board itself and the load.
9. PLC amplifier board life is high, because the PLC amplifier
board automatically with a surge absorbing circuit, the load
generated when the induced electromotive force, will not damage the
PLC amplifier board itself and the PLC.
10 can protect the PLC input contacts, input PLC amplifier board,
but also anti-jamming, such as in the ultrasonic or high-frequency
machine with PLC, then photoelectric switch, proximity switch, will
cause interference to the PLC, plus the input PLC amplifier board
Optical isolation, there is a PLC output high-speed PLC amplifier
board, PLC pulse can only control a step or servo drive, if there
is 4-5 steps or servo synchronous operation, you can use PLC
high-speed pulse amplifier board.
♦ Features
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self test and anti-interference
-- High quality MOSFET with large load and excellent stability
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
Model | JR-XJ |
Output type | MOSFET(PNP OUT) |
I/O points | 4CH,6CH,8CH,12CH,16CH |
Input signal | NPN/PNP |
Input voltage | DC24V |
Output voltage | DC 12-24V |
Output Contacts | 1NO |
Contact capacity(resistive) | 5A 24VDC |
Operation voltage/Release voltage | >5VDC/<1.5VDC |
Operation time/Release time | <10ms/<10ms |
Switching frequency | ≥5kHz |
Dimensions(WxH) | 87×46mm |
Mounting | DIN rail |