| Type | CS-800 | |
| Illumination | d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE
No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition
c standards) | |
| Size of integrating sphere | Φ40mm,Alvan diffused reflection surface coating | |
| Wavelength range | 400-700nm | |
| Wavelength interval | 10nm | |
| Half spectral width | 5nm | |
| Observation angle | 2°/10° | |
| Measurement light source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF | |
| Data being displayed | SPD distribution/data, sample's color values, color difference
values/graph, pass/fail results, color error tendency, color
simulation, display measurement area,history data color simulation,
manual input standard sample, generate measurement report | |
| Measurement time | About 1 second | |
| Measurement time interval | 0.5 second | |
| Measuring caliber | Φ11mm | |
| Color space | CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell
MI,CMYK | |
|
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),555,color
classification | |
|
| Other colorimetric indices | WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger
Stensby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density,
T density,E density, M density | |
|
| Repeatability | light splitting reflectivity: standard deviation within 0.08% | |
| color values:ΔE*ab<=0.015(After calibration, standard deviation
of 30 measurements on test white board, 5 second
intervals),Maximum: 0.03 | |
| Battery capacity | rechargeable, 20000 continuous tests, 7.4V/6000mAh | |
| Data storage | 40000 test results | |
| Light source longevity | 5 years, 1.5 million tests | |
| Inter-instrument agreement | ΔE*ab within 0.2 (BCRA color charts II, average of the 12 charts) | |
| Work temperature range | 0~45℃, relative humidity 80% or below(at 35°C), no condensation | |
| Standard accessories | AC power line, operating manual, color management software, drive
software, electronic operating manual, color management guide, USB
cable, black/white calibration tube, protection cover, electronic
color charts | |
| Optional accessories | powder molding device, measurement and test report | |
