

Add to Cart
Sinco Tech 6114B LED 2'' Water Temp Gauge Meter Auto Mobile Led Display White Screen 12V Gauge
the actual price,Please enquire
Description :
Apply: All 12v cars
Water temp gauge:
1 * Digital LED Water Temp Gauge
1 * Water Temp Sensor(NPT1/8)
1 * Cable
1 * English installation instruction
structure
The water temperature and water level sensor is composed of a
temperature controller and a water level control part. It is also
equipped with a pressure relief device in front of the electric
valve and a rotary muffler heater for heating
principle
The water level sensor in the vessel transmits the sensed water
level signal to the controller. The computer in the controller
compares the measured water level signal with the set signal to
obtain the deviation. Then, according to the nature of the
deviation, it sends the "open" and "close" instructions to the
electric water supply valve to ensure that the vessel reaches the
set water level. After the water inlet program is completed, the
computer in the temperature control part sends an "ON" command to
the electric valve supplying heat medium, so the system starts to
heat the water in the container. When the set temperature is
reached. Only when the controller sends out the command to close
the valve and cut off the heat source, the system enters the
thermal insulation state. During the programming process, it is
ensured that the electric control valve controlling the heat source
does not open when the system does not reach the safe water level,
thus avoiding heat loss and accidents.