Large Amplitude Piezoelectric Transducer Ultrasound Plate Stainless Steel Material
Brand Name:Ours
Certification:CE and FCC
Model Number:ARS-QXHNQ13550 PZT-4
Minimum Order Quantity:1PCS
Delivery Time:2-3 days
Payment Terms:T/T, Western Union, PAYPAL
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
how to mount ultrasonic cleaning transducer for cleaning tank
Introduction of ultrasonic oscillator:
Ultrasound vibrator, also known as ultrasonic vibrator, ultrasonic
vibrator, is a kind of ultrasonic transducer, is the core component
of the ultrasonic cleaning machine. Industry standard name:
ultrasonic transducer, belongs to piezoelectric ceramic material,
one of the main parts of ultrasonic cleaning machine. In terms of
power, the single ultrasonic head is 60W and 100W. Frequencies are:
20KHZ, 25KHZ, 28KHZ, 40KHZ, 68KHZ, 80KHZ, 100KHZ, or higher,
respectively; from the shape of the difference is: straight column,
horn, or higher.
Characteristics of ultrasonic oscillator:
1. High performance: high mechanical Q value, high conversion
efficiency and good quality; 2. ultrasonic oscillator transducer,
large amplitude, excellent performance; 3. ultrasonic oscillator
transducer, heat resistance: piezoelectric ceramic material has
good heat resistance, can expand the use of temperature range, at
the same time, high Q value, small resonant impedance, low
calorific value; 4. ultrasonic oscillator transducer product
appearance clean, rust-free. No obvious depression or scratch.
Installation technology of ultrasonic vibration head:
1. Preparatory tools: Argon arc welding, No. 10 inner hexagonal
wrench, chrome-iron-tin wire, 2.5 square high temperature wire,
2*2.5 cable line, oscillator glue, (stripping pliers, casing,
tie-up, sand blasting machine, pipe fittings, etc.). 2. Welding
screw: Calculate the arrangement position of the oscillator, weld
the screw in the cleared position, then clean the screw around,
make sure it is flat, so as not to affect the installation of the
oscillator. 3. Glue disposition: mix glue evenly according to the
prescribed proportion. (Merry, Eroda, 4030 glue mixed before
bonding, KMD398 glue mixed in the bonding process). 4. Install the
vibration head: Apply the glue evenly on the bottom of the
ultrasonic oscillator, gently twist the air and excess glue between
the bottom of the transducer and the contact surface of the
cylinder bottom, so that the oscillator is more closely integrated
with stainless steel. Fifth, solidification and condensation:
solidification at relatively high room temperature, 4-8 hours
wiring, 24 hours after power test machine, test machine absolutely
not allowed to be empty vibration. Note: 1. Metal seed nailing
machine can also replace argon arc welding. 2. Welding screw must
be fully welded, otherwise it is easy to fall off. 3. Regarding
curing, the length of time should consider temperature, low
temperature for a long time, high temperature for a faster time. It
is recommended to operate at room temperature, even if heated, do
not overheat, appropriate and best.
Features:
1. Low heat
2. Good thermal stability
3. Frequency and static capacitance consistency strong.
4. Resonance impedance is low.
5. The average length of life.
6. It can be widely used in a variety of ultrasonic cleaning
equipment.
7. High performance: mechanical Q value, high vibration efficiency,
high amplitude
Payment Terms:Prepaid by Bnak, T/T and West Union, ect.
Technical support: All our products adopt advanced technology, produce product with
advanced system, all worker are experienced and skillful.
| Type | Length(mm) | Weight(g) | Frequency(KHz) | Resonance Impedance (Ω) | Static Capacity (pF)±10% | Input Power(W) |
| ARS-QXHNQ-20100 PZT-8 | 94 | 900 | 20 | 10-20 | 5200 | 100 |
| ARS-QXHNQ-25100 PZT-4 | 77 | 710 | 25 | 10-20 | 6600 | 100 |
| ARS-QXHNQ-28100 PZT-8 | 66 | 625 | 28 | 10-20 | 5200 | 100 |
| ARS-QXHNQ-28100 PZT-4 | 66 | 624 | 28 | 10-20 | 6600 | 100 |
| ARS-QXHNQ-30100 PZT-8 | 61 | 555 | 30 | 10-20 | 5200 | 100 |
| ARS-QXHNQ-2560 PZT-4 | 77 | 530 | 25 | 10-20 | 5400 | 60 |
| ARS-QXHNQ-2860 PZT-8 | 68 | 470 | 28 | 10-20 | 3800 | 60 |
| ARS-QXHNQ-2850 PZT-4 | 82 | 425 | 28 | 10-20 | 4100 | 50 |
| ARS-QXHNQ-3360 PZT-8 | 58 | 420 | 33 | 10-20 | 3800 | 60 |
| ARS-QXHNQ-4060 PZT-8 | 55 | 300 | 40 | 10-20 | 3800 | 60 |
| ARS-QXHNQ-4060 PZT-4 | 56 | 310 | 40 | 10-20 | 5400 | 60 |
| ARS-QXHNQ-4050 PZT-4 | 54 | 260 | 40 | 10-20 | 4100 | 50 |
| ARS-QXHNQ-4050-1 PZT-4 | 57 | 300 | 40 | 10-20 | 4100 | 50 |
| ARS-QXHNQ-5435 PZT-4 | 36 | 135 | 54 | 10-20 | 3200 | 35 |
| ARS-QXHNQ-6860 PZT-8 | 80 | 460 | 68 | 10-20 | 3800 | 60 |
| ARS-QXHNQ-68120 PZT-4 | 67 | 588 | 68 | 10-20 | 7800 | 120 |
| ARS-QXHNQ-8060 PZT-4 | 60 | 325 | 80 | 10-20 | 5400 | 60 |
| ARS-QXHNQ-12060 PZT-4 | 56 | 260 | 120 | 10-20 | 5400 | 60 |
| ARS-QXHNQ-13550 PZT-4 | 54 | 215 | 135 | 10-20 | 4200 | 50 |
Packing:
how to mount ultrasonic cleaning transducer for cleaning tank
Large Amplitude Piezoelectric Transducer Ultrasound Plate Stainless Steel Material
Inquiry Cart
0